M
Mike
help.....I know it's maybe the wrong NG, but could you help or direct
me to the right one.
This morning I tried to burn data to a DVD......only burnt the intro then
stopped with a error.
Tried again ... same thing...
Virus checked, spyware checked, all OK
Did a sfc scannow, did a system restore to 2 days ago.
Tried again, same results.
Un-installed Nero and removed all traces from registry.
Reloaded Nero.
Tried again, same results.
I can burn to DVD-RW and CD-RW and CD-R but not DVD+ or DVD-
I am adding the error message, I know its long but in other posts it has
been said that not enough info is given.
Nothing unusual happened at shutdown last night or bootup this morning.
Problems seem to start at 8:48:15 AM #21
I don't know how to interpret this data, hoping someone can help.
TIA
Thanks again
Mike
ERROR
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Nero v6.3.1.13\nero\Wnaspi32.dll': Ver=2.0.1.59,
size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.13 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1 TA 0 -
6.3.1.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 -
6.3.1.13
Adapter driver: <xmasscsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0
DMA: On
DiskPeripheral : ST3160023A atapi Port 0 ID 1
DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0
DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 1 ID 1
DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0
DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4081 D: CDRom0
HL-DT-ST RW/DVD GCC-4521 E: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 376MB (385640kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.7.2005
CD-ROM (MP3)
8:45:30 AM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
8:45:30 AM #2 Phase 90 File dlgbrnst.cpp, Line 1836
Buffer Underrun Protection activated
8:45:30 AM #3 Text 0 File Reader.cpp, Line 118
Reader running
8:45:30 AM #4 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4081B running
8:45:30 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
8:45:30 AM #6 Text 0 File Burncd.cpp, Line 3167
Turn on Track-at-once, using CD-R/RW media
8:45:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 290017 ( 64:28.67)
8:45:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
8:45:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST DVDRAM GSA-4081B;
CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00
00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3:
00 00 00 (invalid)
8:45:30 AM #10 Text 0 File DlgWaitCD.cpp, Line 418=========================================
8:45:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 290018 (290018) = #290018/64:26.68
relocatable, disc pos for caching/writing not required/required, no
patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
290016 blocks [HL-DT-ST DVDRAM GSA-4081B]
--------------------------------------------------------------
8:45:30 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
594264064, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
290018 | lead-out | 1 | 0x00 | 0x41
8:45:30 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
Removed 2 run-out blocks from end of track 1. Length: 290018 -> 290016.
8:45:32 AM #14 Phase 24 File dlgbrnst.cpp, Line 1836
Caching of files started
8:45:32 AM #15 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.
8:45:32 AM #16 Phase 25 File dlgbrnst.cpp, Line 1836
Caching of files completed
8:45:32 AM #17 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 24x (3,600 KB/s)
8:45:32 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
orig at #0): write at #0
8:45:32 AM #19 Text 0 File Mmc.cpp, Line 20180
Set BUFE: supported -> ON
8:48:15 AM #20 SCSI -1039 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FF0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x02 0x77 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x34 0x10 0x04 0x80 0x09 0x01
8:48:15 AM #21 CDR -1039 File Writer.cpp, Line 304
Focus or tracking error
8:48:16 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
8:48:16 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
8:48:16 AM #24 SCSI -1039 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x34 0x10 0x04 0x80 0x09 0x01
8:48:16 AM #25 CDR -1039 File WriterStatus.cpp, Line 193
Focus or tracking error
8:48:16 AM #26 TRANSFER -18 File WriterStatus.cpp, Line 193
Could not perform EndTrack
8:48:16 AM #27 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
HL-DT-ST DVDRAM GSA-4081B\H1 T0
8:48:16 AM #28 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack
8:48:16 AM #29 Text 0 File Mmc.cpp, Line 15005
<HL-DT-STDVDRAM GSA-4081B> start Close Session
8:48:16 AM #30 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK
8:48:16 AM #31 Phase 38 File dlgbrnst.cpp, Line 1836
Burn process failed at 24x (3,600 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created
11/17/2004 9:16:48 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
10/28/2003 12:02:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158),
size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504 bytes,
created 12/20/2003 8:03:42 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)
--
======================================
Learning to dislike children at a early age saves
a lot of expense and aggravation later in life.
=====================================
me to the right one.
This morning I tried to burn data to a DVD......only burnt the intro then
stopped with a error.
Tried again ... same thing...
Virus checked, spyware checked, all OK
Did a sfc scannow, did a system restore to 2 days ago.
Tried again, same results.
Un-installed Nero and removed all traces from registry.
Reloaded Nero.
Tried again, same results.
I can burn to DVD-RW and CD-RW and CD-R but not DVD+ or DVD-
I am adding the error message, I know its long but in other posts it has
been said that not enough info is given.
Nothing unusual happened at shutdown last night or bootup this morning.
Problems seem to start at 8:48:15 AM #21
I don't know how to interpret this data, hoping someone can help.
TIA
Thanks again
Mike
ERROR
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Nero v6.3.1.13\nero\Wnaspi32.dll': Ver=2.0.1.59,
size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.13 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1 TA 0 -
6.3.1.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 -
6.3.1.13
Adapter driver: <xmasscsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0
DMA: On
DiskPeripheral : ST3160023A atapi Port 0 ID 1
DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0
DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 1 ID 1
DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0
DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4081 D: CDRom0
HL-DT-ST RW/DVD GCC-4521 E: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 376MB (385640kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.7.2005
CD-ROM (MP3)
8:45:30 AM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
8:45:30 AM #2 Phase 90 File dlgbrnst.cpp, Line 1836
Buffer Underrun Protection activated
8:45:30 AM #3 Text 0 File Reader.cpp, Line 118
Reader running
8:45:30 AM #4 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4081B running
8:45:30 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
8:45:30 AM #6 Text 0 File Burncd.cpp, Line 3167
Turn on Track-at-once, using CD-R/RW media
8:45:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 290017 ( 64:28.67)
8:45:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
8:45:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST DVDRAM GSA-4081B;
CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00
00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3:
00 00 00 (invalid)
8:45:30 AM #10 Text 0 File DlgWaitCD.cpp, Line 418=========================================
8:45:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 290018 (290018) = #290018/64:26.68
relocatable, disc pos for caching/writing not required/required, no
patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
290016 blocks [HL-DT-ST DVDRAM GSA-4081B]
--------------------------------------------------------------
8:45:30 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
594264064, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
290018 | lead-out | 1 | 0x00 | 0x41
8:45:30 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
Removed 2 run-out blocks from end of track 1. Length: 290018 -> 290016.
8:45:32 AM #14 Phase 24 File dlgbrnst.cpp, Line 1836
Caching of files started
8:45:32 AM #15 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.
8:45:32 AM #16 Phase 25 File dlgbrnst.cpp, Line 1836
Caching of files completed
8:45:32 AM #17 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 24x (3,600 KB/s)
8:45:32 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
orig at #0): write at #0
8:45:32 AM #19 Text 0 File Mmc.cpp, Line 20180
Set BUFE: supported -> ON
8:48:15 AM #20 SCSI -1039 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FF0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x02 0x77 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x34 0x10 0x04 0x80 0x09 0x01
8:48:15 AM #21 CDR -1039 File Writer.cpp, Line 304
Focus or tracking error
8:48:16 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
8:48:16 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
8:48:16 AM #24 SCSI -1039 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x34 0x10 0x04 0x80 0x09 0x01
8:48:16 AM #25 CDR -1039 File WriterStatus.cpp, Line 193
Focus or tracking error
8:48:16 AM #26 TRANSFER -18 File WriterStatus.cpp, Line 193
Could not perform EndTrack
8:48:16 AM #27 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
HL-DT-ST DVDRAM GSA-4081B\H1 T0
8:48:16 AM #28 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack
8:48:16 AM #29 Text 0 File Mmc.cpp, Line 15005
<HL-DT-STDVDRAM GSA-4081B> start Close Session
8:48:16 AM #30 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK
8:48:16 AM #31 Phase 38 File dlgbrnst.cpp, Line 1836
Burn process failed at 24x (3,600 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created
11/17/2004 9:16:48 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
10/28/2003 12:02:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158),
size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504 bytes,
created 12/20/2003 8:03:42 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)
--
======================================
Learning to dislike children at a early age saves
a lot of expense and aggravation later in life.
=====================================