Unable to access configuration for microsoft personal web server

G

Guest

Hl everyone,
I built image using TD with FP 2007 without any filter,and
then i put it into FBA process,during this i have been shown some error
message .The error are following

1.Unable to access configuration for microsoft personal web server

2.saveHive(.DEFAULT)failed

Could anyone tell me the reason for this error?
 
K

KM

1. Known issue if you happened to include "FrontPage Server Extensions" component. Did you? If you did, I wonder how you managed to
add that component.

In case you want to read a little bit more about that issue:
http://groups.google.com/group/micr...d/browse_thread/thread/31f68f2b9038a06f?hl=en

2. Does you media where you deploy the image to have enough free space for the FBA to finish?
Or, related, if you target partition is too small to hold the "during-FBA" or "post-FBA" image.

Also, how does your FBALOG.TXT look like?
 
G

Guest

--
Raj


KM said:
1. Known issue if you happened to include "FrontPage Server Extensions" component. Did you? If you did, I wonder how you managed to
add that component.
Click to expand...
In case you want to read a little bit more about that issue:
http://groups.google.com/group/micr...d/browse_thread/thread/31f68f2b9038a06f?hl=en

2. Does you media where you deploy the image to have enough free space for the FBA to finish?
Or, related, if you target partition is too small to hold the "during-FBA" or "post-FBA" image.

Also, how does your FBALOG.TXT look like?

--
=========
Regards,
KM





Hello KM,
Click to expand...
Thank you for your kind information.Actually my image slx
was taken from xpefiles.com in which i downloaded this
xpproemulation_327.zip.And i didn't remove any component from slx ,i just add
my hardware component then i built image and i put it into FBA process.

And i chose default size for FBWF i,e, 64MB and MY DOM
size is 1GB and RAM size is 512 .
In my case FBA process took nearly 57 minutes .I just metion last step of My
FBALOG.TXT look like



11:11:11 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\System.Deployment.dll
(ExitCode: 0x0)
11:11:13 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\dfsvc.exe (ExitCode: 0x0)
11:11:17 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Microsoft.Build.Engine.dll
(ExitCode: 0xffffffff)
11:11:18 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Microsoft.Build.Framework.dll
(ExitCode: 0x0)
11:11:25 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Microsoft.Build.Tasks.dll
(ExitCode: 0xffffffff)
11:11:27 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Microsoft.Build.Utilities.dll
(ExitCode: 0x0)
11:11:29 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Accessibility.dll (ExitCode:
0x0)
11:11:33 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\System.EnterpriseServices.dll
(ExitCode: 0xffffffff)
11:11:36 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\System.Security.dll (ExitCode:
0xffffffff)
11:11:38 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\CustomMarshalers.dll (ExitCode:
0xffffffff)
11:11:44 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\System.DirectoryServices.dll
(ExitCode: 0xffffffff)
11:11:46 - [FBALaunch]
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\System.DirectoryServices.Protocols.dll (ExitCode: 0xffffffff)
11:12:38 -
11:12:40 -
11:12:48 -
11:12:52 -
11:12:55 -
11:13:05 -
11:13:11 -


11:18:43 - [FBAFlushFilesToDisk] FlushFileBuffers(C:\) succeeded!
11:18:43 - [FBADoProperShutdown] Sleeping...
11:18:53 - [FBADoProperShutdown] Exiting process...
11:19:58 - [RegFilter] Initializing the parameters for the Registry Filter
11:19:58 - [RegFilter] Using file size: 1 MB
11:19:58 - [RegFilter] Using filename RegfData
11:19:58 - [RegFilter] Using file location \??\C:
11:19:58 - [RegFilter] Created target file \??\C:\RegfData
11:19:59 - [RegFilter] RAM disk created
11:19:59 - [RegFilter] Formatting RAM disk...
11:19:59 - [RegFilter] Format: PercentComplete<0>...
11:19:59 - [RegFilter] Format: PercentComplete<20>...
11:20:00 - [RegFilter] Format: PercentComplete<40>...
11:20:00 - [RegFilter] Format: PercentComplete<60>...
11:20:00 - [RegFilter] Format: PercentComplete<80>...
11:20:00 - [RegFilter] Format: Complete.
11:20:00 - [CallEntryPointThread] C:\WINDOWS\system32\regfinit.dll,
InitializeRegistryFilter
11:20:01 - [FBWF] ConfigureFbwf() Start.

11:20:02 - [FBWF] Getting FBWF config parameters from registry.

11:20:02 - [FBWF] EnablePostFBA will be 1.

11:20:02 - [FBWF] Custom threshold 64MB.

11:20:02 - [FBWF] CacheType 1.

11:20:03 - [FBWF] Failed to open FBWF FBA Exclusion key.

11:20:03 - [FBWF] Number Protection Entries 0

11:20:03 - [FBWF] ConfigureFbwf() End, finalStatus = 0x0.

11:20:03 - [CallEntryPointThread] C:\WINDOWS\system32\fbwfdll.dll,
ConfigureFbwf
11:20:04 - [FBASetProgressText] Resetting Setup Flag...
11:23:09 - [FBADoProperShutdown] Sleeping...
11:23:19 - [FBADoProperShutdown] Rebooting system...


Thank you

Regards
Raj
 
K

KM

Raj,
Thank you for your kind information.Actually my image slx
was taken from xpefiles.com in which i downloaded this
xpproemulation_327.zip.And i didn't remove any component from slx ,i just add
my hardware component then i built image and i put it into FBA process.
Click to expand...

That explains the first issue. As I already mentioned, please read through this thread:
http://groups.google.com/group/micr...d/browse_thread/thread/31f68f2b9038a06f?hl=en

Basically I intentiaonally left the "FrontPage Server Extensions" component in the XPProEmulation since the image serves debugging
purposes, not production.
And i chose default size for FBWF i,e, 64MB and MY DOM
size is 1GB and RAM size is 512 .
In my case FBA process took nearly 57 minutes .I just metion last step of My
FBALOG.TXT look like
Click to expand...

You should be actually running the image through FBA on a HDD.
1G may not be enough fit for such huge image like XPProEmulation. Any particular reason you've chosen XPProEmulation? You may want
to remove some heavy components from that image config if you don't need them. For instance, ASP.Net, .Net Framework, etc.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

*Unable to access configuration for MS personal WebServer' 1
How to get rid of IIS? 5
XP Pro emulation for SP2+FP2007 should not have component "FrontPage Server Extensions" 3
UNable to access configuration for MIcrosoft Personal Web Server 1
Installation Issue with MS Personal Web Server 4
Personal Web server 1
Configuration Error Message 8
fp4autl.dll 5

Top