startup errors, blue screen.

T

Tim

Hi,

I have an xp machine unfortunately after installing a new program or driver
( i don't know which) windows won't boot fully.I have no idea what this
program was, sorry!

I can't access windows via safemode as all I get is a black screen. Windows
loads a bit further when I select Last Known Good configuration .It gets to
the point where "windows is loading ...please wait"and then I get the
following error:

"The problem seems to be caused by the following file: mrxdav.sys

DRIVER_UNLOADED_WITHOUT_CANNCELLING_PENDING_OPERATIONS



TECHNICAL INFO:
*** STOP: 0x000000CE ( 0xBA5E75A8, 0x00000000, 0xBA5E75A8, 0x00000000)

mrxdav.sys


Please note I get this error after loading last known good configuration.

Is there a fix for this error message? Many thank

Tim Vieweg.
 
C

CrazySaguaro

If I had this problem, I would put in the original Windows XP disc and try
doing the Automated System Recovery (ASR).

-Gina
 
N

nass

Tim said:
Hi,

I have an xp machine unfortunately after installing a new program or driver
( i don't know which) windows won't boot fully.I have no idea what this
program was, sorry!

I can't access windows via safemode as all I get is a black screen. Windows
loads a bit further when I select Last Known Good configuration .It gets to
the point where "windows is loading ...please wait"and then I get the
following error:

"The problem seems to be caused by the following file: mrxdav.sys

DRIVER_UNLOADED_WITHOUT_CANNCELLING_PENDING_OPERATIONS



TECHNICAL INFO:
*** STOP: 0x000000CE ( 0xBA5E75A8, 0x00000000, 0xBA5E75A8, 0x00000000)

mrxdav.sys


Please note I get this error after loading last known good configuration.

Is there a fix for this error message? Many thank

Tim Vieweg.

Use the recovery Console and run the chkdsk /r , you will need the XP CD to
perform this procedure.
How to install and use the Recovery Console in Windows XP
http://support.microsoft.com/kb/307654

A hot fix if you been able to log on and still get the sys file missing or
the error message you can download it from here:
A stop in Mrxdav.sys error occurs, or your computer restarts
http://support.microsoft.com/kb/832143/en-us
HTH
nass
 
N

nass

Tim
Then your HDD is dying or going bad. You need to download the diagnostic
tool for your HDD from the manufacturer website and run a test.
If the process too much for you, hen take the machine to your local repair
shop to rescue any data you want first and then proceed to repair ot clean
install of the operating system.

The Error refer to a bad sectors on your HDD hat may be caused by the
software driver you installed!
HTH
nass
---
http://www.nasstec.co.uk

Tim said:
Hi, Thanks for your help, Sadly, I ran chksk /r and it gets to 70% and goes
to 60% and keeps repeating this. Any ideas?
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top