Gigabyte or Abit or Asus

C

Colonel Blip

Hello, All!

I'm interested in getting a 939 socket m/b and an Athlon64 3000+. I've
always been an Asus m/b person, but thought I would at least test the waters
on views of the Asus vs. other m/b's. Any views on 'best' of these three
manufactures for socket 939?

Thanks.

Colonel Blip.
E-mail: (e-mail address removed)
 
3

3200+

Colonel Blip said:
Hello, All!

I'm interested in getting a 939 socket m/b and an Athlon64 3000+. I've
always been an Asus m/b person, but thought I would at least test the waters
on views of the Asus vs. other m/b's. Any views on 'best' of these three
manufactures for socket 939?

Thanks.

Colonel Blip.
E-mail: (e-mail address removed)
Click to expand...
=----

I would never ever use anything by Gigabyte again. IMHO their products are
of inferior design and their technical support is so poor that it is hard to
believe they get away with it.

Jon
 
S

Scott

3200+ said:
=----

I would never ever use anything by Gigabyte again. IMHO their products
are
of inferior design and their technical support is so poor that it is hard
to
believe they get away with it.

Jon
Click to expand...

If I had of known that before buying a gigabyte motherboard.....
This is a copy of the email I sent them today. By the sounds of it I may get
better support here.

"When the system has booted up and has been running smoothly for 5mins to an
hour, the system suddenly freezes. During this time I can press Ctrl-Alt-Del
to bring up the task manager but nothing is using 100% of the processor.
Most programs are using 0-10% but nothing more. I can shut down programs
from the task manager, but I cannot use them. To say this, if I am writing
to cd or dvd, it will continue to do so - But I cannot click on any menus or
'ok' or 'cancel' buttons if any happen to be on screen. This problem can
last from 30 seconds to 5mins and then I have control over my programs again
like nothing had ever happened. My virus scanner is completely up to date
(Norton antivirus) and both firewalls (Norton and Windows SP2) are up to
date and running as they should.
Another problem I have is that sometimes I cannot move files to another
folder using drag and drop yet if I cut and paste this works without a
hitch.
Can you think of any reason why this would happen.
My motherboard drivers and Bios are bang up to date."

Scott
 
F

FG

Are you sure you have used the correct BIOS settings ?

Could it be a software problem ? Have you tried repairing
Windows, if that is the system you use ?
 
L

Larry Gagnon

"When the system has booted up and has been running smoothly for 5mins
to an hour, the system suddenly freezes. During this time I can press
Ctrl-Alt-Del to bring up the task manager but nothing is using 100% of
the processor. Most programs are using 0-10% but nothing more. I can
shut down programs from the task manager, but I cannot use them. To say
this, if I am writing to cd or dvd, it will continue to do so - But I
cannot click on any menus or 'ok' or 'cancel' buttons if any happen to
be on screen. This problem can last from 30 seconds to 5mins and then I
have control over my programs again like nothing had ever happened. My
virus scanner is completely up to date (Norton antivirus) and both
firewalls (Norton and Windows SP2) are up to date and running as they
should.
Another problem I have is that sometimes I cannot move files to another
folder using drag and drop yet if I cut and paste this works without a
hitch.
Can you think of any reason why this would happen. My motherboard
drivers and Bios are bang up to date."

Scott
Click to expand...

Scott: what you describe does NOT sound like a hardware problem at all. I
would suggest you either have a serious malware problem (spyware, virus
etc) or your Windows system needs repair. If it were hardware related your
system would likely never get to booting the OS, freeze completely or
reboot. I certainly wouldn't blame Gigbyte!

Larry Gagnon, A+ certified tech.
 
Z

Zen

I had this exact same problem with my new MSI motherboard, oddly enough it
was solved
by reinstalling all of the motherboards chipset drivers. Now it works
great. It was very
frustrating when troubleshooting the problem however. Try it and see if it
helps

Zen
 
S

Scott

FG said:
Are you sure you have used the correct BIOS settings ?

Could it be a software problem ? Have you tried repairing
Windows, if that is the system you use ?
Click to expand...

This only happened when I upgraded my motherboard and processor. At first I
had WinXP64 on it and thought that might be the problem. So I took that off
and installed my own Win XP Home (after a reformat) and the problem
persisted.
I have uninstalled all the drivers and reinstalled again to be met by the
same problem. Could it be a power supply problem?

I have the BIOS settings changed and changed back, even using the BIOS's
Optimized settings.

Scott
 
3

3200+

Larry Gagnon said:
On Mon, 21 Mar 2005 14:54:14 +0000, Scott wrote:

Scott: what you describe does NOT sound like a hardware problem at all. I
would suggest you either have a serious malware problem (spyware, virus
etc) or your Windows system needs repair. If it were hardware related your
system would likely never get to booting the OS, freeze completely or
reboot. I certainly wouldn't blame Gigbyte!

Larry Gagnon, A+ certified tech
Click to expand...

Agreed, probable driver or malware problem.

Jon.
 
R

Roy

Getting back to the question at hand, it is necessary that you decide what
your upgrades are going to be. If you are looking at the Nvidia Chipset with
a 939 pin CPU them the highest rated motherboards on the market are the MSI
and DFI brands. If you intend on staying with the Via Chipset then both the
Asus and Abit motherboards are rated very high, and will still be able to
use AGP video cards.

Be careful, because in the 939 pin selection of motherboards there are the
new SLI boards which will require an upgrade to the new PCI-Express Video
Cards which are not cheap.

I currently have the Asus A8V Deluxe Revision 2.0 with an AMD 64 3500+
Winchester CPU and I am very pleased with it. Installation was easy and I
currently have it overclocked to 2419 mhz (10% Overclock) with auto
settings. It is rock stable and I didn't have to upgrade my ATI Graphics
Card to PCI-E as previously stated.

Read the latest reviews on this matter at the following address:
http://www.anandtech.com/mb/showdoc.aspx?i=2128
It will help you decide which route to take.
Good luck and happy shopping!
 
C

ColBlip

Hello, Roy!
You wrote on Mon, 21 Mar 2005 18:38:24 GMT:

Thanks. I'll take a look at the site. Definitely have no intention of
replacing my AGP at this time which is why I was considering the A8V Deluxe.

ColBlip.
E-mail: (e-mail address removed)

R> Getting back to the question at hand, it is necessary that you decide
R> what your upgrades are going to be. If you are looking at the Nvidia
R> Chipset with a 939 pin CPU them the highest rated motherboards on the
R> market are the MSI and DFI brands. If you intend on staying with the Via
R> Chipset then both the Asus and Abit motherboards are rated very high,
R> and will still be able to use AGP video cards.

R> Be careful, because in the 939 pin selection of motherboards there are
R> the new SLI boards which will require an upgrade to the new PCI-Express
R> Video Cards which are not cheap.

R> I currently have the Asus A8V Deluxe Revision 2.0 with an AMD 64 3500+
R> Winchester CPU and I am very pleased with it. Installation was easy and
R> I currently have it overclocked to 2419 mhz (10% Overclock) with auto
R> settings. It is rock stable and I didn't have to upgrade my ATI Graphics
R> Card to PCI-E as previously stated.

R> Read the latest reviews on this matter at the following address:
R> http://www.anandtech.com/mb/showdoc.aspx?i=2128
R> It will help you decide which route to take.
R> Good luck and happy shopping!

R> ??>> Hello, All!
??>>
??>> I'm interested in getting a 939 socket m/b and an Athlon64 3000+. I've
??>> always been an Asus m/b person, but thought I would at least test the
??>> waters
??>> on views of the Asus vs. other m/b's. Any views on 'best' of these
??>> three manufactures for socket 939?
??>>
??>> Thanks.
??>>
??>> Colonel Blip.
??>> E-mail: (e-mail address removed)
??>>
??>> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
??>> News==----
??>> http://www.newsfeeds.com The #1 Newsgroup Service in the World!
120,000+
??>> Newsgroups
??>> ----= East and West-Coast Server Farms - Total Privacy via Encryption
??>> =----
 
T

Tim

Try a repair install and if that does not work, do a fresh install. Backup
your data first.

What you describe sounds like a software problem, not a motherboard problem.

I would also do a full virus and spyware scan.

- Tim
 
W

Wes Newell

I'm interested in getting a 939 socket m/b and an Athlon64 3000+. I've
always been an Asus m/b person, but thought I would at least test the waters
on views of the Asus vs. other m/b's. Any views on 'best' of these three
manufactures for socket 939?
Click to expand...
Who makes the board doesn't really matter much. What matters is the
chipset and features the board supports. That's why I bought a Jetway
board for the A64 over a year ago and I'm still happy with it today.
 
R

Ruel Smith

Colonel said:
I'm interested in getting a 939 socket m/b and an Athlon64 3000+. I've
always been an Asus m/b person, but thought I would at least test the
waters on views of the Asus vs. other m/b's. Any views on 'best' of these
three manufactures for socket 939?
Click to expand...

For features: Abit FATA1TY boards

For overclocking: Abit

For stability: Asus

Gigabyte's not too shabby. Some people complain about their customer
service, but all mainboard manufacturers' customer service sucks. You're
literally one in BILLIONS to them, and they could care less if you don't
buy your next board from somewhere else.
 
E

Ed Light

Wes Newell said:
Who makes the board doesn't really matter much. What matters is the
chipset and features the board supports. That's why I bought a Jetway
board for the A64 over a year ago and I'm still happy with it today.
Click to expand...

If you're overclocking then it matters. Some boards barely overclock, some
go whole hog, with the same chipset.


--
Ed Light

Smiley :-/
MS Smiley :-\

Send spam to the FTC at
(e-mail address removed)
Thanks, robots.
 
L

Luc The Perverse

Scott said:
If I had of known that before buying a gigabyte motherboard.....
This is a copy of the email I sent them today. By the sounds of it I may get
better support here.

"When the system has booted up and has been running smoothly for 5mins to an
hour, the system suddenly freezes. During this time I can press Ctrl-Alt-Del
to bring up the task manager but nothing is using 100% of the processor.
Most programs are using 0-10% but nothing more. I can shut down programs
from the task manager, but I cannot use them. To say this, if I am writing
to cd or dvd, it will continue to do so - But I cannot click on any menus or
'ok' or 'cancel' buttons if any happen to be on screen. This problem can
last from 30 seconds to 5mins and then I have control over my programs again
like nothing had ever happened. My virus scanner is completely up to date
(Norton antivirus) and both firewalls (Norton and Windows SP2) are up to
date and running as they should.
Another problem I have is that sometimes I cannot move files to another
folder using drag and drop yet if I cut and paste this works without a
hitch.
Can you think of any reason why this would happen.
My motherboard drivers and Bios are bang up to date."
Click to expand...


Hehe. Funny.

Next thing we can sue leash makers when our dogs attack people.
 
E

Ed

If you're overclocking then it matters. Some boards barely overclock, some
go whole hog, with the same chipset.
Click to expand...

Ya I noticed DFI seems to be getting some good OCing reviews lately...
http://www.madshrimps.be/?action=getarticle&articID=305)
The DFI will run very stable at 300 x 8 using TCCD 512x2 @1T, achieving
300 x 9 with simple air-cooling credits to how well the BIOS, memory
controller and the quality of this board to work in concert with each
other. This board is simply splendid in reaching the best possible
performance.

Ed
 
S

Scott

Tim said:
Try a repair install and if that does not work, do a fresh install. Backup
your data first.

What you describe sounds like a software problem, not a motherboard
problem.

I would also do a full virus and spyware scan.

- Tim
Click to expand...

I'll do just that. Will report back.

Scott
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Memory recommendations 4
Sempron 3100 in an Asus A7v8x 1
How to boot from a CD (a7v8x) 4
What is the current recommendation for an ASUS m/b and processor 5
Changing motherboards with RAID0 17
Is a Raid0 install worth doing? 4
Can't boot from the CD 7
CPU/motherboard/chipset advice appreciated 3

Top