found new hardware after every reboot

M

Michelle

I had problems installing drivers for a Panasonic high
speed scanner and image control scsi board. I finally got
the drivers installed and the scanner works but after
every reboot I get the window indicating I have new
hardware for each - what do I do?

I saw something listed for printers and how to delete the
registry key but I do not know which keys to delete for
the scanner and scsi image controller board.
 
R

Rich Barry

Michelle, did you look in Device Manager to see if there were any
yellow marks next to Image Devices
or SCSI Devices? If yes, the drivers did not fully install. Go to the
Manufacturers websites and see if
there's any info or FAQ's that might help. DON'T mess with the
Registry.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Scanner Appearing a number of times/Remove Hardware 11
SCSI causes "Found new hardware" repeatedly 1
Found New Hardware 1
help me with SCSI ID and scanner 2
I Can't Remove Device Manager Entries 1
Locating and updating drivers 2
Scanner driver not found but is working 1
AGFA Duoscan T2000XL [SCSI] 0

Top