DMIO errors

[mwilliams4]

I'm getting a slew of dmio errors that read the following:

dmio: Harddisk2 write error at block 488397165: status 0xc0000010
dmio: Harddisk2 write error at block 488397166: status 0xc0000010
dmio: Harddisk2 write error at block 488397167: status 0xc0000010

dmio: Harddisk3 write error at block 488397165: status 0xc0000010
dmio: Harddisk3 write error at block 488397166: status 0xc0000010
dmio: Harddisk3 write error at block 488397167: status 0xc0000010

dmio: Harddisk5 write error at block 488397165: status 0xc0000010
dmio: Harddisk5 write error at block 488397166: status 0xc0000010
dmio: Harddisk5 write error at block 488397167: status 0xc0000010

It's just these three blocks.

They are all WD2500 hard drives, using a highpoint rocketraid 454, raid
0 (just using it as an IDE adapter).

The drivers were previously software mirrored using W2K, but after the
errors I broke the mirror, and have subequently re-loaded the OS. It
now has the same problem.

W2K adv serv, SP4

Any ideas out there?

 

[mwilliams4]

Also, I've run a disk check on each of the drives and there are no
errors, and they all show as healthy in Disk Management.