XP reverts to 640x480 after every boot?

G

Gilden Man

Hi,
Running XPSP1a with an ATI 9800SE with Catalyst 3.10 drivers.
For some reason now every time XP restarts, it's back to 640x480. I've
checked everything I can think of (not much :(), but cannot work out why
this happens.
Any ideas?
Thanks in advance.
 
A

Andrew

Running XPSP1a with an ATI 9800SE with Catalyst 3.10 drivers.
For some reason now every time XP restarts, it's back to 640x480. I've
checked everything I can think of (not much :(), but cannot work out why
this happens.
Any ideas?

Have you got the right monitor drivers installed and is XP detecting
your monitor at boot time?
 
M

Mike P

Sounds like safe mode, xp doesn't ussualy go below 800x600 except that.
Maybe a botched driver install? Try downloading the drivers again and using
the ati uninstaller before re-installing.

Mike
 
G

Gilden Man

I'd check for viruses and test the RAM with MemTest86 3.0 just in case.

Thanks for the repsonses. Thought it might be a known problem. I've
already tried most of those things. Driver reinstall, etc., etc.
I'll just reinstall XP <sigh>
Cheers.
 
M

Mike P

SOunds to me like a driver problem, xp doesn't normally go below 800x600
except in safe mode. If you have an ati card unistall the cp and drivers
then reboot into safe mode, run the driver uninstaller then reinstall the
driver.

Mike
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top