XP HOME SETUP DISK

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I HAVE FACTORY INSTALLED WINDOWS WITH NO CD-ROM. WAS GOING TO INSTALL
WINDOWS XP HOME SETUP DISK FOR FLOPPY BOOT, BUT INFO AT BOTTOM OF PAGE SAYS
I WILL NEED XP CD-ROM TO FINISH SETUP, WHICH I DON'T HAVE. WHAT GIVES.

-SCOTT NIVENS
 
Every manufacturer supplies some means to reinstall/repair an OEM
installation.
Read the manual that came with your system and it will explain how.

peter
 
I HAVE FACTORY INSTALLED WINDOWS WITH NO CD-ROM. WAS GOING TO INSTALL
WINDOWS XP HOME SETUP DISK FOR FLOPPY BOOT, BUT INFO AT BOTTOM OF PAGE SAYS
I WILL NEED XP CD-ROM TO FINISH SETUP, WHICH I DON'T HAVE. WHAT GIVES.

-SCOTT NIVENS



Please unstick your CapsLock key. Posting in all caps, as you have
done, is the Usenet equivalent of shouting, and is considered very rude
by a large number of people. More importantly, posting in all caps
makes the post harder to read, further reducing your chances of getting
help; a great many people won't even try to read such a message. If you
really want help, simply comply with the dictates of common courtesy and
the conventions of the milieu.

Contact the computer's manufacturer for assistance.

Microsoft requires its licensed OEM computer manufacturers to
provide a means of returning the computer to its original, ex-factory
state. The particular method of recovery, however, is left entirely to
the discretion of each individual computer manufacturer.

Legally, the OEM has met it's contractual obligation to Microsoft
by providing a means of returning the PC to its ex-factory state,
whether it's a Recovery CD or a Recovery Partition. They are not
legally obliged to provide a true installation CD as part of the sale.
Reputable, customer-service aware OEMs, like Dell and Gateway, do
provide a full OEM installation CD, that does permit custom
installations and repairs. However, many uncaring OEMs, such as
eMachines, Compaq, HP, and Sony, in an effort to save pennies and reduce
their support costs by having to hire support people that need only say
"Boot from the Recovery CD to return your PC to its original condition,"
provide only a CD bearing a disk image of the hard drive as it left the
factory.

Essentially, it boils down to "You get what you pay for."

The computer's manufacturer will have provided you some means of
returning the computer to it's original, ex-factory state. Read the
documentation that came with the computer, or check the manufacturer's
support web site, and follow the instructions/procedures provided.


--

Bruce Chambers

Help us help you:



They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. -Benjamin Franklin

Many people would rather die than think; in fact, most do. -Bertrand Russell
 
I HAVE FACTORY INSTALLED WINDOWS WITH NO CD-ROM. WAS GOING TO INSTALL
WINDOWS XP HOME SETUP DISK FOR FLOPPY BOOT, BUT INFO AT BOTTOM OF PAGE SAYS
I WILL NEED XP CD-ROM TO FINISH SETUP, WHICH I DON'T HAVE. WHAT GIVES.

-SCOTT NIVENS

Do not shout.

I've heard that XP can install from floppies, but haven't tried it
myself. Even if that were possible, you'd need another computer with
a CD Rom. So just buy one. Teak CD/RW $37 at buy.com. Or get a DVD
if your comp can handle it.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top