G
Guest
I just bought a refurbished PC and am trying to install XP. XP won't boot from the CD, and when I specify setup.exe from the CD drive, the message says "cannot run program from DOS." Any suggestions?
from the CD, and when I specifyCarey Frisch said:The Windows XP CD is bootable and contains all the tools necessary
to partition and format your drive. Follow this procedure and allow
Windows XP to partition and format your drive:
NOTE: It would be best to physically disconnect all your peripheral hardware
devices, except the monitor, mouse and keyboard, before installing XP.
NOTE: If you have an internal Zip Drive installed, physically disconnect the
EIDE and power cable to it before proceeding, otherwise your main
hard drive may not be assigned the customary C: drive letter.
After installing Windows XP, you may then reconnect it.
1. Open your BIOS and set your "CD Drive as the first bootable device".
===> Accessing Motherboard BIOS
===> http://www.michaelstevenstech.com/bios_manufacturer.htm
2. Insert your Windows XP CD in the CD Drive and reboot your computer.
3. You'll see a message to boot to the CD....follow the instructions.
4. The setup menu will appear and you should elect to delete all the existing
Windows partitions, then create a new partition, then format the primary
partition (preferably NTFS) and proceed to install Windows XP.
5. Clean Install Windows XP
http://michaelstevenstech.com/cleanxpinstall.html
[Courtesy of Michael Stevens, MS-MVP]
6. ==> Immediately after installing Windows XP, turn on XP's Firewall.
==> http://www.microsoft.com/security/protect/
7. After Windows XP is installed, visit the Windows Update website
and download the available "Critical Updates".
8. After installing the critical updates, be sure and visit the support website
of the manufacturer of the computer to download and install any
available Windows XP compatible drivers, such as video adapter
and audio drivers.
9. If you happen to run into any installation difficulties, use the following resources:
How to Troubleshoot Windows XP Problems During Installation
http://support.microsoft.com/default.aspx?scid=kb;EN-US;310064
Troubleshooting Windows XP Setup
http://www.kellys-korner-xp.com/xp_setup.htm
[Courtesy of MS-MVP Kelly Theriot]
--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User
Be Smart! Protect your PC!
http://www.microsoft.com/security/protect/
-------------------------------------------------------------------------- -------------------
|I just bought a refurbished PC and am trying to install XP. XP won't boot
Mike said:Hello Carey,
I went through step one. Step doesn't work for me. I am running Win
me on a laptop and it boots just like the CD for Win XP wasn't in the
drive. If I launch the set up process once the computer has booted,
it restarts and boot from the CD ROM and starts SET UP. However I can
a problem at the screen where I am supposed to choose the partition
where to install XP. I would like to delete the only one existing
partition (format the HDD) so that I can do a clean install of XP.
This isn't possible seemingly as I get a message saying the the
partition I am trying to delete contains temporary files that are
needed for set up process.
Any ideas?
Many thanks
from the CD, and when I specifyCarey Frisch said:The Windows XP CD is bootable and contains all the tools necessary
to partition and format your drive. Follow this procedure and allow
Windows XP to partition and format your drive:
NOTE: It would be best to physically disconnect all your peripheral
hardware devices, except the monitor, mouse and
keyboard, before installing XP.
NOTE: If you have an internal Zip Drive installed, physically
disconnect the EIDE and power cable to it before
proceeding, otherwise your main hard drive may not be
assigned the customary C: drive letter. After
installing Windows XP, you may then reconnect it.
1. Open your BIOS and set your "CD Drive as the first bootable
device".
===> Accessing Motherboard BIOS
===> http://www.michaelstevenstech.com/bios_manufacturer.htm
2. Insert your Windows XP CD in the CD Drive and reboot your
computer.
3. You'll see a message to boot to the CD....follow the
instructions.
4. The setup menu will appear and you should elect to delete all
the existing Windows partitions, then create a new partition,
then format the primary partition (preferably NTFS) and
proceed to install Windows XP.
5. Clean Install Windows XP
http://michaelstevenstech.com/cleanxpinstall.html
[Courtesy of Michael Stevens, MS-MVP]
6. ==> Immediately after installing Windows XP, turn on XP's
Firewall. ==> http://www.microsoft.com/security/protect/
7. After Windows XP is installed, visit the Windows Update website
and download the available "Critical Updates".
8. After installing the critical updates, be sure and visit the
support website of the manufacturer of the computer to
download and install any available Windows XP compatible
drivers, such as video adapter and audio drivers.
9. If you happen to run into any installation difficulties, use
the following resources:
How to Troubleshoot Windows XP Problems During Installation
http://support.microsoft.com/default.aspx?scid=kb;EN-US;310064
Troubleshooting Windows XP Setup
http://www.kellys-korner-xp.com/xp_setup.htm
[Courtesy of MS-MVP Kelly Theriot]
--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User
Be Smart! Protect your PC!
http://www.microsoft.com/security/protect/
------------------------------------------------------------------------- -
-------------------
I just bought a refurbished PC and am trying to install XP. XP
won't bootsetup.exe from the CD drive, the message says "cannot run program
from DOS." Any suggestions?
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.