W2K prof rebooting

[Shiva]

Win2K Prof reboots after the login promt(Ctrl+alt+del)
appears.
Its not working fine with the last known gud congfig &
safe mode also.
Help me to solve it

 

[Dave Patrick]

From a parallel install, run regedt32.exe, then from the Local Machine Hive,
choose Registry|Load Hive, then navigate to the
%windir%\system32\config
directory on the other install, and find the system file, then Open, in the
Key Name box give it some temp name, then under tempname, navigate to
HKEY_LOCAL_MACHINE\SYSTEM\Select
and look in the Reg_Dword value of "Current", this is the current
controlset, then navigate to
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet00x\Control\CrashControl
Where x = the value of "Current" (found above) and set the values as follows

"AutoReboot"=dword:00000000
"CrashDumpEnabled"=dword:00000001
"LogEvent"=dword:00000001
"Overwrite"=dword:00000001
Then navigate back up to "tempname" and choose Unload Hive, and boot your
original install, Autoreboot is now turned off so you should be able to read
the stop error.

Windows 2000 Stop Messages
http://www.microsoft.com/TechNet/win2000/win2ksrv/reskit/sopch16.asp

Bug Check Codes
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/ddtools/hh/ddtools/bcintro_3dkj.asp

 

[samrat9]

-----Original Message-----
From a parallel install, run regedt32.exe, then from the Local Machine Hive,
choose Registry|Load Hive, then navigate to the
%windir%\system32\config
directory on the other install, and find the system file, then Open, in the
Key Name box give it some temp name, then under tempname, navigate to
HKEY_LOCAL_MACHINE\SYSTEM\Select
and look in the Reg_Dword value of "Current", this is the current
controlset, then navigate to
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet00x\Control\CrashContr ol
Where x = the value of "Current" (found above) and set the values as follows

"AutoReboot"=dword:00000000
"CrashDumpEnabled"=dword:00000001
"LogEvent"=dword:00000001
"Overwrite"=dword:00000001
Then navigate back up to "tempname" and choose Unload Hive, and boot your
original install, Autoreboot is now turned off so you should be able to read
the stop error.

Windows 2000 Stop Messages
http://www.microsoft.com/TechNet/win2000/win2ksrv/reskit/s opch16.asp

Bug Check Codes
http://msdn.microsoft.com/library/default.asp? url=/library/en-us/ddtools/hh/ddtools/bcintro_3dkj.asp

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft MVP [Windows NT/2000 Operating Systems]

Win2K Prof reboots after the login promt(Ctrl+alt+del)
appears.
Its not working fine with the last known gud congfig &
safe mode also.
Help me to solve it

=======Samrat====(solution)([email protected])
Boot the pc using win2k pro cd and replace the old win2k
files with new one by redirecting the installation to the
old directory of os and on the same drive.This will solve
yur problem