W2k Connection Sharing

G

Guest

hi

i got a internet connection sharing pc running on W2k Pro and my clients are running on WinXP. All these PCs ar
connected to a hub and the w2k pc are connected to an ADSL modem
The win2k pc which host the internet connection sharing is able to connect to the internet through ADSL line, bu
all my clients are not able to go to the internet

IP setting for w2k Pro 192.168.0.1, mask 255.255.255.0 - I did check the LAN internet connection sharing and it's enabled

My XP clients are using the IP from the range 192.168.0.2-192.168.0.5 with the default gateway of 192.168.0.
In all the client's IE, I didn't dial a default connection and at the LAN Settings, nothing are checked/selected

Pls check whether my w2k and winxp settings are right or wrong? what might be the problem that i'm not able to connec
to the internet accept that w2k pc which is directly connected to ADSL. Thks
 
B

BT

You should share the ADSL modem connection icon, not the LAN

BT

David said:
hi!

i got a internet connection sharing pc running on W2k Pro and my clients
are running on WinXP. All these PCs are
connected to a hub and the w2k pc are connected to an ADSL modem.
The win2k pc which host the internet connection sharing is able to connect
to the internet through ADSL line, but
all my clients are not able to go to the internet.

IP setting for w2k Pro 192.168.0.1, mask 255.255.255.0 - I did check the
LAN internet connection sharing and it's enabled.
My XP clients are using the IP from the range 192.168.0.2-192.168.0.5 with
the default gateway of 192.168.0.1
In all the client's IE, I didn't dial a default connection and at the LAN
Settings, nothing are checked/selected.
Pls check whether my w2k and winxp settings are right or wrong? what might
be the problem that i'm not able to connect
 
G

Guest

what's the default gateway that i should be using for the client? is it the w2k connection sharing PC's IP or the atm's gateway?
 
B

BT

the pc which used to share the connection dont need the gateway address

David said:
what's the default gateway that i should be using for the client? is it
the w2k connection sharing PC's IP or the atm's gateway?
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top