VPN Hlp please

G

Guest

Hi

I have a Laptop,with a Vodaphone internet connection Card installed, and
would like to be able to connect to my desktop at home, while away.
I would like to set up a VPN, but i have a LAN at home, and use a Netgear
ADSL Router/Modem DG834G.

Can some one explain how to configure the router, so that i can use a VPN.
Or give me a link that will explain how to go about it.

Thanks for any help on this.
 
R

Robert L [MS-MVP]

DG834G is VPN pass-through router, so you may setup VPN using w2k/xp. quoted
form http://www.ChicagoTech.net
How to configure Win 2000/XP Pro as VPN host
Prior to Windows 2000/XP Pro, you must add PPTP on NT 4.0 Server to
establish VPN connections. With the release of Windows 2000/XP Pro, you have
the ability to run a Windows 2000/XP Pro as a VPN host. However, Windows
2000/XP Pro enables only one VPN connection at a time and requires Internet
Protocol (IP).

Before you start the VPN configuration, you should have a equipment (modem,
T1, Frame Relay, ADSL, or cable modem) connecting to the Internet. Also make
sure you have correct TCP/IP settings on the W2K/XP.

To setup Win XP (in our case) Pro as VPN host, go to the Properties of My
Network Places>Create a New Connections>Set up a Advanced Connection>Accept
Incoming Connections. On the Devices for Incoming Connections dialog box, do
not select any device, only click Next and check Allow Private Connections,
and then click Next. On the Allowed Users dialog box, select or add all
users for whom you want to enable access. The accounts have to exist on both
computers that are involved in establishing the VPN connection. On the New
Connection Wizard, File and Printer Sharing for Microsoft Networks, Internet
Protocol (TCP/IP) and Client for Microsoft Networks should be listed as
networking components. By default, Allow callers to access my local area
network and Assign TCP/IP address automatically using DHCP are checked. If
you would like to keep the default settings, click Next to continue. Now,
the Incoming Connection icon should show on Incoming section under the
Properties of My Network Places and is ready to use.


--
For more and other information, go to http://www.ChicagoTech.net


Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.


Bob Lin, MS-MVP, MCSE & CNE

Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
G

Guest

Hi Robert
Thanks for the reply.
I have followed your instructions, and have set up the Advanced Connection
on the Desktop computer that i want to connect to.
Can you explain how i go about configureing the Router so that i can conect
when using my Laptop.

Thanks
 
G

Guest

Hi Robert

Also i have my LAN setup with Manualy configured IP address's, i dont use
DCHP, would it be better if i used DCHP instead?

Thanks
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top