Video Capure fro Analog Canon UC-X30

[Guest]

I am trying to captue analog video through my Radeon RX70 XT-256PCIE graphic
card vi a 9 pin VIVO olug with S-video and composite video/sound capture.
The sound is captured fine but I am getting a 'Capture device not detected
message'
This is a new machine 3.2 GB Intek processor with all patches and updates
installed.

Does anybody have any ideas??

 

[Graham Hughes]

Movie maker works best with digital firewire devices. Diod the card come
with it's own capture software, if so use this, if not look on their site.

--
Graham Hughes
MVP Digital Media
Laird of Glencairn
www.dvds2treasure.com
www.simplydv.com

 

[Guest]

Hi Graham!

There is no SW available on their site. and their card is built up around
the 9 plug ViVO system. It is as if the machine does not identify that I am
adding and external piece of HW (the Camera) and therefore MovieMaker does
not find the signal.

Thanks

Bruce

 

[Cari \(MS-MVP\)]

If you're using an ATI VIVO card for analog capture, you should use the ATI
MultiMedia Center software that comes with the card (or can be downloaded
from their website).