Using USB Floppy to install SCSI driver

G

Guest

I am trying to setup Windows 2000 server using a USB floppy. I press F6 to
install additional drivers and the PERC4 driver gets installed OK. Then
press enter to setup, then accept the license, after that, Windows loads and
would normally begin to copy files. The first file it needs is the PERC 4
driver again, but now Windows cannot read from the USB floppy. Setup just
stays at please put disk....in drive A. Does anybody know any workaround(s)
or specific model of floppy drive? Thanks much
 
W

WM

What kind of floppy drive are you using? There are literally only a couple
that are supported by Windows 2000 setup (don't know which off the top of my
head - but can check).
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

SCSI Driver Needed During Install but No Floppy 4
Access My Dell PC can't access floppy drive 7
USB Floppy (diskette) Drives 3
Required device driver missing 1
SCSI drives on new Win 2000 install 1
floppy drive to USB adaptert? 14
Usb floppy driver 3
Install Win2k to SATA HD/Hard drive without "A" Drive Floppy 13

Top