USB device appears as network adapter?

  • Thread starter Thread starter lenny
  • Start date Start date
L

lenny

Hi,
I am trying to install a USB network adapter to my machine. The USB 2 card
that I have just installed will not recognise the devise but with the
onboard USB 1.1 ports I can plug it in and it works. The only differnce is
that when I plug it into the USB 1 ports the device in Device manager
actually appears under Network Adapters, as it should, and not under the USB
controller. When I plug it into the USB 2 PCI card it is shown as an unknown
device under the USB controllers section of Device manager and not under
Network Adapters.
Please Help.
Lenny
 
I have downloaded the latest drivers from the site and installed them. It
has recognised a USB Pen once but usually it will not recognise anything.
"Lanwench [MVP - Exchange]"
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

USB complains about not being high speed. 11
USB to Parallel Adapter 18
Driver installation for USB 3.0 card 4
Realtek Network Adaptor 9
External disk drive problem 8
Can't recognize PS/2 and USB at same time 10
Card Reader not recognised 5
USB Port Not Working 3

Back
Top