USB cam will not work

[Guest]

I have it connected but i dont think the drivers for my usb are installed
does anyone know how to find the software for them

thanks
Amber

 

[Alvin Brown]

Hello Amber

Well a good idea would be to specify the type of webcam
that you have ok so you can be helpded, also who ever
makes your webcam try going to that manufactueres
website to look for drivers ok.

alvin

 

[Guest]

Hello Alvin,

thanks for trying but no ... i have the software for the cam i have it
installed already... but its my usb cards that i dont think have software...
can you help me with that
thanks
AMber

 

[Test User]

Hello Alvin,

thanks for trying but no ... i have the software for the cam i have it
installed already... but its my usb cards that i dont think have software...
can you help me with that
thanks
AMber

What is the computer? Why do you think that the drivers are not installed?

Does any USB hardware work? If not, be sure that USB services is turned ON
in the BIOS. How you do this depends on the computer brand.

Right click on My Computer and choose Properties. Click on the Hardware
tab and in the middle section, click on Device Manager.

Look for a Universal Serial Bus controllers section. Right click on them
and verify that they are not marked as Disabled.

A fairly easy way to address problems here is to right-click on them and
choose Uninstall (not disable) and then when they are gone, go to Action,
scan for hardware changes. This will force a re-detection of the hardware
and reload the drivers.

HTH
-pk

 

[Yves Leclerc]

Normally, the USB drivers are "built-in" to XP. USB 2.0 drivers came in
Service Pack 1.

In order to check to see of the web cam is working and that you have the
software, you need to look on the maker's web site.

 

[Guest]

no this is not that this is 1EEE 1394 bus host controller

 

[Guest]

if you dont mind could you please email it to me
(e-mail address removed)
thanks