USB Bandwidth 446% ?

[Charalabos Michael]

Hello,
I've installed a Pinnacle PCTV Hybrid Pro Stick on
on Nforce 2 USB Port. Bandwidth Used 446%. I've installed
a Via USB 2 PCI controller and installed the PCTV Stick.
The bandwidth usage is 446%. (when i activate the device).

Any ideas ?

Thank you

 

[Guest]

Perhaps you meant 446 mA (milliamps)? If so you should be OK as each port
should be able to accomodate 500 mA.

Nospam

 

[Charalabos Michael]

Hello,

Perhaps you meant 446 mA (milliamps)? If so you should be OK as each port
should be able to accomodate 500 mA.

Nope, i ment the "Bandwidth"!

 

[Bob I]

Hello,



Nope, i ment the "Bandwidth"!

I think I would mark that off to a driver error, visual issue only.

 

[Charalabos Michael]

Hello Bob,

I think I would mark that off to a driver error, visual issue only.

Then how you explain the same driver under Vista uses up to 51% ?

Thank you

 

[Bob I]

And what exactly IS the problem? That the visual report is bogus?

 

[Charalabos Michael]

Hello Bob,

And what exactly IS the problem? That the visual report is bogus?

I guess not since i have jerky sound too from that usb device
with the 446% bandwidth usage. I thought here i could found
the solution but i guess i'll have to contact MS.

Thank you

 

[Bob I]

Jerky sound from the USB device? Have you tried reinstalling the "device"?

 

[Charalabos Michael]

Hello Bob,

Jerky sound from the USB device? Have you tried reinstalling the "device"?

Yes, i tried everything with no success. =(

 

[Bob I]

Hello Bob,



Yes, i tried everything with no success. =(

Perhaps starting a thread describing the "device" and the actual problem
you are having with the device, would result in a solution. The "446%"
reading is a visual effect. Think 446% of what amounts to a full pipe is
nonsensical, so I think you will need to look at the install.