USB 2.0 PCMCIA Card

C

Chris W.

Hi All,

I've been trying to get my new NEC 4 port USB 2.0 PCMCIA
card to work. I can't for the life of me get it to run.
It shows up as a "Standard Enhanced PCI to USB Host
Controller". It says it's working. But no go on any USB
peripherals.

Any thoughts? I've loaded the drivers that came with the
card as well, but it doesn't seem to help.

Thanks

Chris W.
MCSE 2000, CCNP
 
A

Alvin Brown

Hello

Try remving the drivers that you installed and also
remove the card. Go to the maker of that product website
and see if they are any updated drivers for it.

Once you reboot and the system comes back up, insert the
card and when prompted for driver see if XP will find the
drivers, if not you could try the ones that you downloaded
provided you found some.

Alvin
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

USB 2.0 PCMCIA Card 7
PCMCIA Card installation problem 10
USB 2.0 PCMCIA card won't let me use scanner 3
usb 2.0 pci card 4
PCMCIA USB 2.0 card that can go in the bottom slot? 6
Why does my USB 2.0 ports not perform at 2.0 speeds? 7
Why Transfer from internal HD to USB External Drive? 4
USB 2.0 card on a crawl ... 1

Top