Upgrade of memory

[luminore]

I want upgrade memory (existing is 128MB) in PIII 866MHz, to 256MB or more,
to install Windows XP. Can I add 256MB module, so total will be
384MB(128+256)? Or I need use 256MB module only? Or 2 x 256=512MB?

Motherboard info:

Mainboard model CT-6OJV2
VGA Model Embedded 3D AGP VGA
Intel 815E GMCH + ICH2 AGPset with integr. 2D/3D graphics
CPU Type: Pentium III 866MHz
BIOS: Award BIOS
Memory modules: 128MB DIMM

This board can support up to a Celeron 1.1 or a PIII 1.13 max.
256 PC 133 DIMMs are the max that can be used per slot on this board.

 

[Keith AH]

According to Crucial your board will hold 512 Mbs of ram Total Looks like 1
256 and 2 128

check here
http://137.201.245.23/gsa/store/listparts.asp?model=CT-6OJV2&tabid=CR

 

[luminore]

According to Crucial your board will hold 512 Mbs of ram Total Looks like
1 256 and 2 128

check here
http://137.201.245.23/gsa/store/listparts.asp?model=CT-6OJV2&tabid=CR

 

[Keith AH]

You can run WinXP on 128 not well but it will run
FYI the system will only hold 2 double sided and 3 single sided chips