Uninstalling CCC

  • Thread starter Thread starter Wathil
  • Start date Start date
W

Wathil

Ok, I want to uninstall everything. The CCC, the Drivers, and WDM. The
version is 6.7

I want to replace with Omega Drivers.

My fear is that there will be a conflict with anything Ati remaining in my
system. I have heard of third party programs that clean drivers, but I think
when I used them before, it caused problems with my computer, not sure but I
have a brand new clean installation and I do not want to take the chance.

I have heard of Ati's CAT-uninstaller but the version that is on the Ati
site seems rather old (10-8-2003) and is located here:

https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&folderID=293

Will this 300kb utility work on my Sapphire Radeon X1600 Pro AGP 256?

If it will work, what is the procedure? I am new to the world of Ati so any
help would be appreciated.

Thanks
 
If you want to make sure you remove anything, use this software program it
works very well removing ALL ATI software left behind after using the Ati's
CAT-uninstaller.

Driver Cleaner Pro
http://www.drivercleaner.net
 
Ok, so I go into Add/Remove Programs (I have WinXP Pro) select "Ati Software
Uninstall Utility" go through the removal then remove all the other things
in Add/Remove Programs that refer to Ati.

After that, I use the 3 year old CAT-uninstaller?

After that I use the Driver Cleaner Pro?
 
Well the deed is done *crosses fingers and toes* So far so good *_*

Thanks for your help
 
Wathil said:
Ok, I want to uninstall everything. The CCC, the Drivers, and WDM. The
version is 6.7

I want to replace with Omega Drivers.

My fear is that there will be a conflict with anything Ati remaining in my
system. I have heard of third party programs that clean drivers, but I think
when I used them before, it caused problems with my computer, not sure but I
have a brand new clean installation and I do not want to take the chance.

I have heard of Ati's CAT-uninstaller but the version that is on the Ati
site seems rather old (10-8-2003) and is located here:

https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&folderID=293

Will this 300kb utility work on my Sapphire Radeon X1600 Pro AGP 256?

If it will work, what is the procedure? I am new to the world of Ati so any
help would be appreciated.

Thanks
Detailed instructions for cleaning out the ati software at ati.com/install.
 
Correct!

Wathil said:
Ok, so I go into Add/Remove Programs (I have WinXP Pro) select "Ati
Software Uninstall Utility" go through the removal then remove all the
other things in Add/Remove Programs that refer to Ati.

After that, I use the 3 year old CAT-uninstaller?

After that I use the Driver Cleaner Pro?
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top