D
Daniel Rudy
I have an SIIG AP-40 PCI SCSI-2 Controller. I'm trying to install WinXP
slipstreamed with SP1. F6 is not an option. I tried it, it doesn't work on
a unattended install, it loads the driver initially, but when it goes to
copy it to the HD, it is unable to copy it, even though the floppy is in the
drive. It's not a bad drive, and it's not a bad floppy at it works on a DOS
boot disk with no problems. I have gone over to msfn.org and read through
their material, and the txtsetup.sif information, and it doesn't work. The
driver is not copied to the HD and when the machine reboots after the file
copy in textmode, it cannot find the CD-ROM because it's on the SCSI bus.
So basically, I'm in a catch 22. It will not install the driver, but it
needs the driver to install. Is there another way to get a mass storage
driver copied and loaded?
HELP!
slipstreamed with SP1. F6 is not an option. I tried it, it doesn't work on
a unattended install, it loads the driver initially, but when it goes to
copy it to the HD, it is unable to copy it, even though the floppy is in the
drive. It's not a bad drive, and it's not a bad floppy at it works on a DOS
boot disk with no problems. I have gone over to msfn.org and read through
their material, and the txtsetup.sif information, and it doesn't work. The
driver is not copied to the HD and when the machine reboots after the file
copy in textmode, it cannot find the CD-ROM because it's on the SCSI bus.
So basically, I'm in a catch 22. It will not install the driver, but it
needs the driver to install. Is there another way to get a mass storage
driver copied and loaded?
HELP!