Trusts

[Sebastian]

Hy guys.

I have some problems to make a Trust with a Windows 2000
Advanced server and a NT4 Server. Im the Admin from the
domain works with W2K, other Admin works with NT4.
The problem is this.
My Server have 2 network cards. I have my domain working
in the net 192.168.* and the other card its in the net
10.7.41.*. The network card where i put my domain with,
AD, DHCP, WINS and DNS its the network 192.168.130.* but
in this net i dont have rotes to the network wheres is the
other trust domain, so the people sugest to me use the
network card in the network 10.7.41.* to make the trust
relationship. well it dont works, and i recive 2 different
error messages one in the mmc console and the other in the
command line.
The error message i recive in mmc console is this: The
Secure Channel (SC) query on domain controller \\(server)
of domain (DOMAIN) to domain (DOMAIN) failed with erro:
There are currently no logon server avaliable to service
the logon request.
An SC Reset will now be attempted.

The error message in command Line: C:\>netdom trust
(DOMAIN) /DomainDOMAIn) /UserDUSER) /PasswordD:
(PASSWORD) /
UserOUSER) /PasswordOPASSWORD) /verify

You already have a connection to \\RJRJO003. Please
disconnect it and then
rerun the netdom command.
The credentials supplied conflict with an existing set of
credentials.

The command failed to complete successfully.

Someone have a sugestion please? Thanks Guys.

Sebastian Guerrero
..

 

[Guest]

Interesing.

Well first of all, have you tested just basic
communication between the two? Ping, tracert, nslookup,
etc? If these basic networking tools do not work,
advanced things such as establishing a trust relationship
will not work either.

What type of network do you have? Are your networking
guys blocking certain ports, using ACL's? All of this
stuff could be causing you problems.

Good luck, and let me know what you find out.

Richard
"Words are the most powerful drug used by mankind"

 

[Johan Arwidmark]

I common issue regarding trusts is the netbios name resolution. Make
sure that both the NT 4.0 and 2000 domain controlleras are using the
same WINS Server.

multihomed servers and WINS are also known to be troublesome...
Try to avoid multihomed servers and WINS....

regards
Johan Arwidmark

Windows User Group - Nordic
http://wug.lutteman.se

 

[Sebastian]

Thanks guys... thank you very very much

-----Original Message-----
I common issue regarding trusts is the netbios name resolution. Make
sure that both the NT 4.0 and 2000 domain controlleras are using the
same WINS Server.

multihomed servers and WINS are also known to be troublesome...
Try to avoid multihomed servers and WINS....

regards
Johan Arwidmark

Windows User Group - Nordic
http://wug.lutteman.se




.