Trouble with Remote Access Server

[nesredep egrob]

I have recently set up a network - caused a bit of bother but it is working well
and everything is to be seen from just a few shortcuts on my screen.
Occasionally I have a look at the event viewer and I see there is trouble afoot.
It is probably caused by me having a sheep short in the top paddoc


Event Type: Error
Event Source: RemoteAccess
Event Category: None
Event ID: 20082
Date: 4/16/2007
Time: 8:13:29 AM
User: N/A
Computer: BORGE
Description:
The Remote Access Server could not reset lana 3 (the error code is the data) and
will not be active on it.
Data:
0000: 23 00 00 00 #...

Next error is

Event Type: Error
Event Source: RemoteAccess
Event Category: None
Event ID: 20082
Date: 4/16/2007
Time: 8:13:29 AM
User: N/A
Computer: BORGE
Description:
The Remote Access Server could not reset lana 5 (the error code is the data) and
will not be active on it.
Data:
0000: 23 00 00 00 #...


Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 4/16/2007
Time: 8:12:40 AM
User: N/A
Computer: BORGE
Description:
The Phase One 1394 Camera Driver service failed to start due to the following
error:
The system cannot find the file specified.

The two first are the ones causing bother and frankly I do not know what to do
about them.
As regards the last, I had a card reader permanently attached to a USB2 port and
could change from SmartCard to SD and CF apparently not cuasing any bother and
doing no harm to the cards. I have therefore haD to install a camera that I no
longer need and I shall uninstall that and probably cure that trouble.
If the first two errorS are important - please try to help

Borge in sunny Perth, Australia

 

[Dave Patrick]

This article may help.

http://support.microsoft.com/default.aspx?scid=kb;en-us;259335

--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect