N
Nimz
We have a syspreped image, which has been created from a Toshiba Tecra
M2.
Our current image works on the following model of machines :-
Toshiba Portege 4000
Toshiba Portge 4010
Toshiba Portege M100
Toshiba Portege R100
Toshiba Tecra M2
Toshiba Tecra S1
Toshiba Satellite Pro 6000
Toshiba Satellite Pro 6100
-------------------------------------------------------------------------------
---
We now have to get the current image working with the new Toshiba Tecra
M5.
The driver I am having a problem with is HDAUDBUS.sys
When the machine first boots up and almost before it even tries to
build itsself, it says it cannot find the file 'hdaudbus.sys' and it
seems like it is looking on the D:, if you browse to system32\drivers,
then the driver installs correctly, but I cannot seem to automate this
process.
I have copied over all the driver and inf files that are required.
I have populated the sysprep.inf file (under the heading
"OemPNPDriversPath") with the correct driver paths. This does not make
any difference. I also have 'DriversSigningPolicy' set to 'IGNORE'
I have sysprep'd the image using -pnp, mini setup and reseal.
The question is :-
A) Am I doing something wrong and is there a correct way of getting
windows/sysprep to automatically install this driver?
B) I have a fix for the above problem, which is :-
Put our sysprep'd image onto the Tecra M5, manually installed ALL the
correct drivers and then re-sysprepped the image. The question is, Is
it ok to do this? (It appears to work well)? Or is it not recommended
to sysprep the same image, multiple times, on different model machines?
Any advice would be appreciated!
Thanks
M2.
Our current image works on the following model of machines :-
Toshiba Portege 4000
Toshiba Portge 4010
Toshiba Portege M100
Toshiba Portege R100
Toshiba Tecra M2
Toshiba Tecra S1
Toshiba Satellite Pro 6000
Toshiba Satellite Pro 6100
-------------------------------------------------------------------------------
---
We now have to get the current image working with the new Toshiba Tecra
M5.
The driver I am having a problem with is HDAUDBUS.sys
When the machine first boots up and almost before it even tries to
build itsself, it says it cannot find the file 'hdaudbus.sys' and it
seems like it is looking on the D:, if you browse to system32\drivers,
then the driver installs correctly, but I cannot seem to automate this
process.
I have copied over all the driver and inf files that are required.
I have populated the sysprep.inf file (under the heading
"OemPNPDriversPath") with the correct driver paths. This does not make
any difference. I also have 'DriversSigningPolicy' set to 'IGNORE'
I have sysprep'd the image using -pnp, mini setup and reseal.
The question is :-
A) Am I doing something wrong and is there a correct way of getting
windows/sysprep to automatically install this driver?
B) I have a fix for the above problem, which is :-
Put our sysprep'd image onto the Tecra M5, manually installed ALL the
correct drivers and then re-sysprepped the image. The question is, Is
it ok to do this? (It appears to work well)? Or is it not recommended
to sysprep the same image, multiple times, on different model machines?
Any advice would be appreciated!
Thanks