The Parallel port driver service failed to start

C

Cooler Dude

I have an "Error" in the Event log.

"The Parallel port driver service failed to start due to the
following error:
The service cannot be started, either because it is disabled or
because it has no enabled devices associated with it."

This is no doubt due to the fact that I recently replaced the
motherboard and the new one does not have a parallel port!

Where can I turn off the service which is attempting to start the
parallel port driver?

TIA
 
B

Bruce Chambers

Cooler said:
I have an "Error" in the Event log.

"The Parallel port driver service failed to start due to the
following error:
The service cannot be started, either because it is disabled or
because it has no enabled devices associated with it."

This is no doubt due to the fact that I recently replaced the
motherboard and the new one does not have a parallel port!

Where can I turn off the service which is attempting to start the
parallel port driver?

TIA


Did you not perform a repair installation when you installed the new
motherboard? If not, you'll probably have other problems, as well.

Normally, and assuming a retail license (many factory-installed OEM
installations are BIOS-locked to a specific chipset and therefore are
*not* transferable to a new motherboard - check yours before starting),
unless the new motherboard is virtually identical (same chipset, same
IDE controllers, same BIOS version, etc.) to the one on which the WinXP
installation was originally performed, you'll need to perform a repair
(a.k.a. in-place upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

Changing a Motherboard or Moving a Hard Drive with WinXP Installed
http://www.michaelstevenstech.com/moving_xp.html

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this point.
You've pulled the proverbial hardware rug out from under the OS. (If
you don't like -- or get -- the rug analogy, think of it as picking up a
Cape Cod style home and then setting it down onto a Ranch style
foundation. It just isn't going to fit.) WinXP, like Win2K before it,
is not nearly as "promiscuous" as Win9x when it comes to accepting any
old hardware configuration you throw at it. On installation it
"tailors" itself to the specific hardware found. This is one of the
reasons that the entire WinNT/2K/XP OS family is so much more stable
than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.




--

Bruce Chambers

Help us help you:



They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. -Benjamin Franklin

Many people would rather die than think; in fact, most do. -Bertrand Russell
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top