The NEW most improve door guide on the matket

  • Thread starter Robert Schneider
  • Start date
R

Robert Schneider

The E Z Nail On Door Guide

Designed by a builder who saw the need for a door guide that would work over floors with carpet and padding over them. One that was easy to install by home owner as well as a installer. Builder from Cincinnati Ohio, Robert Schneider designed a door guide to replace all other door guide being used today.

The E Z Nail On door guide has many fine features over other guide
Take only 4 minutes to install over any wood floors with a hammer
Can be used on all type floors with or with out carpet and padding over the floors. Will self adjust to all width doors as they are installed. Will self adjust to all doors height from the floor with out using wood blocks for adjustment. Will match the decor of your rooom of white, walnut and birch in color. Put color cap for room on room steel pin first.

E Z Nail On is made of steel pins that you drive throw carpet and padding into wood floors. For tile or concrete floors you mark the floor were you want door guide to go and drill 5/6 holes. They must be drilled into floor and place a plastic anchor in hole flash with floor. Then install steel pins in hole in anchor and drive steel pins to proper height
E Z Nail On are installed with doors on track. To remove doors you pop plastic caps from steel pins in second and lift doors from track. To replace just hang doors on trach and replace plastic caps.

E Z Nail On is the only door guide with a 30 day money back satisfaction guarantee. Are not sold in stores at this time. Some 100,000 set are being used un U S and Canada in all types of business and homes. E Z Nail On will solve all kind of trouble any
one might have with sliding closet doors. At home or business as a replacing door guide or for new construction..

For more information amd picture of E Z Nail On door guide visit web site or call 1 877 474 0203 E Z Nail On was designed to make it easy for every one who use it. email; (e-mail address removed)
http://www.eznailon.com
 
J

JAD

will it work on a socket 939?


Robert Schneider said:
Designed by a builder who saw the need for a door guide that would work
over floors with carpet and padding over them. One that was easy to install
by home owner as well as a installer. Builder from Cincinnati Ohio,
Robert Schneider designed a door guide to replace all other door guide
being used today.
 
D

Dave C.

JAD said:
will it work on a socket 939?



over floors with carpet and padding over them. One that was easy to
install
by home owner as well as a installer. Builder from Cincinnati Ohio,
Robert Schneider designed a door guide to replace all other door guide
being used today.

Even better, it will overclock to 10GHz!!! -Dave
 
A

Al Smith

Talk about off topic!!

LOL. I was reading the original post, thinking, "Ok, this has got
to be about computer case doors, right?" Wrong.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top