Template updates but attached pages do not change.....

[Brightbelt]

Hi-
I'm on FP 2003, Win XP Pro, Pent 4. I've got a template
audio page, upon which I've made a size change of the
height in pixels for cells in a table (I also changed the
table height to match the new cell(s) height). The
template changes ok and when I save it, it asks 'would I
like to update the 32 attached files?'. I click 'Yes' and
I even see the green-dotted processing bar run its
course, and so it seems like all the attached pages have
indeed been updated. But when I check the pages out, they
have the old table/cell height settings.
I even published the site again, just to see what would
happen and sure enough, I saw all the audio pages get
updated as if the change was being processed. But no real
change happened. If you need to see what the table is
about, the url for one of the audio pages is:
Http://www.westwindentertainment.com/GSBaudio.htm
It's the table that has song titles and corresponding
links '14k - 56k - Dsl/Cbl' to play the audio clips. I
appreciate any help. I may be doing/not doing something
so stupid & obvious. Thanks for your help,...Brightbelt

 

[Brightbelt]

Hi-
I thought I should post the changed settings etc I'm
going for: the original table/cells had a table height of
240 pixels with cells 30 pixels high. The CHANGED/updated
table has a table height of 280 pixels with cells 35
pixels high. But the table/cells do not seem to be
changing. Thanks,...Brightbelt

 

[Stefan B Rusynko]

Did you save the page after the changes, before publishing
_in your local what do you see in File Preview in Browser

--




| Hi-
| I thought I should post the changed settings etc I'm
| going for: the original table/cells had a table height of
| 240 pixels with cells 30 pixels high. The CHANGED/updated
| table has a table height of 280 pixels with cells 35
| pixels high. But the table/cells do not seem to be
| changing. Thanks,...Brightbelt
|
|
| >-----Original Message-----
| >Hi-
| > I'm on FP 2003, Win XP Pro, Pent 4. I've got a
| template
| >audio page, upon which I've made a size change of the
| >height in pixels for cells in a table (I also changed
| the
| >table height to match the new cell(s) height). The
| >template changes ok and when I save it, it asks 'would I
| >like to update the 32 attached files?'. I click 'Yes'
| and
| >I even see the green-dotted processing bar run its
| >course, and so it seems like all the attached pages have
| >indeed been updated. But when I check the pages out,
| they
| >have the old table/cell height settings.
| > I even published the site again, just to see what
| would
| >happen and sure enough, I saw all the audio pages get
| >updated as if the change was being processed. But no
| real
| >change happened. If you need to see what the table is
| >about, the url for one of the audio pages is:
| >Http://www.westwindentertainment.com/GSBaudio.htm
| >It's the table that has song titles and corresponding
| >links '14k - 56k - Dsl/Cbl' to play the audio clips. I
| >appreciate any help. I may be doing/not doing something
| >so stupid & obvious. Thanks for your help,...Brightbelt
| >.
| >

 

[Brightbelt]

Hi Stefan-
Yes I saved the web page (and template) after changes.
The web page (after changes) previews in the browser with
the old table settings, so it's not coming thru there
either. The template previews Ok in the browser (it's the
body of a page so the shared border doesn't preview. The
new table does come thru in the preview for the template
though). I'm stumped, so any ideas would be very welcome.
Thanks for your help,...Brightbelt

-----Original Message-----
Did you save the page after the changes, before publishing
_in your local what do you see in File Preview in Browser

--

_____________________________________________
SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
"Warning - Using the F1 Key will not break anything!" (- ;
To find the best Newsgroup for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
_____________________________________________


"Brightbelt" <[email protected]> wrote

in message news:[email protected]...

 

[Stefan B Rusynko]

DWT does not automatically update pages unless you are using a disc based web (or WSS)

--




| Hi Stefan-
| Yes I saved the web page (and template) after changes.
| The web page (after changes) previews in the browser with
| the old table settings, so it's not coming thru there
| either. The template previews Ok in the browser (it's the
| body of a page so the shared border doesn't preview. The
| new table does come thru in the preview for the template
| though). I'm stumped, so any ideas would be very welcome.
| Thanks for your help,...Brightbelt
|
| >-----Original Message-----
| >Did you save the page after the changes, before
| publishing
| >_in your local what do you see in File Preview in Browser
| >
| >--
| >
| >_____________________________________________
| >SBR @ ENJOY (-: [ Microsoft MVP -
| FrontPage ]
| >"Warning - Using the F1 Key will not break anything!" (-
| ;
| >To find the best Newsgroup for FrontPage support see:
| > http://www.net-sites.com/sitebuilder/newsgroups.asp
| >_____________________________________________
| >
| >
| in message | >| Hi-
| >| I thought I should post the changed settings etc I'm
| >| going for: the original table/cells had a table height
| of
| >| 240 pixels with cells 30 pixels high. The
| CHANGED/updated
| >| table has a table height of 280 pixels with cells 35
| >| pixels high. But the table/cells do not seem to be
| >| changing. Thanks,...Brightbelt
| >|
| >|
| >| >-----Original Message-----
| >| >Hi-
| >| > I'm on FP 2003, Win XP Pro, Pent 4. I've got a
| >| template
| >| >audio page, upon which I've made a size change of the
| >| >height in pixels for cells in a table (I also changed
| >| the
| >| >table height to match the new cell(s) height). The
| >| >template changes ok and when I save it, it
| asks 'would I
| >| >like to update the 32 attached files?'. I click 'Yes'
| >| and
| >| >I even see the green-dotted processing bar run its
| >| >course, and so it seems like all the attached pages
| have
| >| >indeed been updated. But when I check the pages out,
| >| they
| >| >have the old table/cell height settings.
| >| > I even published the site again, just to see what
| >| would
| >| >happen and sure enough, I saw all the audio pages get
| >| >updated as if the change was being processed. But no
| >| real
| >| >change happened. If you need to see what the table is
| >| >about, the url for one of the audio pages is:
| >| >Http://www.westwindentertainment.com/GSBaudio.htm
| >| >It's the table that has song titles and corresponding
| >| >links '14k - 56k - Dsl/Cbl' to play the audio clips. I
| >| >appreciate any help. I may be doing/not doing
| something
| >| >so stupid & obvious. Thanks for your
| help,...Brightbelt
| >| >.
| >| >
| >
| >
| >.
| >

 

[Brightbelt]

Hi Stefan-
I thought I'd add some perhaps useful info - before I
was trying to change cell/table height sizes (in pixels)
and nothing happened - still no progress there. (I have a
disk-based web and tried the Http method also). I have
just now tried OTHER changes on my templates (eg,
different alignment of photos in table cells) just to
experiment and the pages DO get updated correctly. So
maybe this has something more to do with FP's handling of
tables than the templates per se ? I don't know, but
thought I'd offer this info. Thanks,...Brightbelt

-----Original Message-----
DWT does not automatically update pages unless you are

using a disc based web (or WSS)

--

_____________________________________________
SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
"Warning - Using the F1 Key will not break anything!" (- ;
To find the best Newsgroup for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
_____________________________________________


"Brightbelt" <[email protected]> wrote

in message news:[email protected]...

| Hi Stefan-
| Yes I saved the web page (and template) after changes.
| The web page (after changes) previews in the browser with
| the old table settings, so it's not coming thru there
| either. The template previews Ok in the browser (it's the
| body of a page so the shared border doesn't preview. The
| new table does come thru in the preview for the template
| though). I'm stumped, so any ideas would be very welcome.
| Thanks for your help,...Brightbelt
|
| >-----Original Message-----
| >Did you save the page after the changes, before
| publishing
| >_in your local what do you see in File Preview in Browser
| >
| >--
| >
| >_____________________________________________
| >SBR @ ENJOY (-: [ Microsoft MVP -
| FrontPage ]
| >"Warning - Using the F1 Key will not break anything!" (-
| ;
| >To find the best Newsgroup for FrontPage support see:
| > http://www.net-sites.com/sitebuilder/newsgroups.asp
| >_____________________________________________
| >
| >
| in message [email protected]...
| >| Hi-
| >| I thought I should post the changed settings etc I'm
| >| going for: the original table/cells had a table height
| of
| >| 240 pixels with cells 30 pixels high. The
| CHANGED/updated
| >| table has a table height of 280 pixels with cells 35
| >| pixels high. But the table/cells do not seem to be
| >| changing. Thanks,...Brightbelt
| >|
| >|
| >| >-----Original Message-----
| >| >Hi-
| >| > I'm on FP 2003, Win XP Pro, Pent 4. I've got a
| >| template
| >| >audio page, upon which I've made a size change of the
| >| >height in pixels for cells in a table (I also changed
| >| the
| >| >table height to match the new cell(s) height). The
| >| >template changes ok and when I save it, it
| asks 'would I
| >| >like to update the 32 attached files?'. I click 'Yes'
| >| and
| >| >I even see the green-dotted processing bar run its
| >| >course, and so it seems like all the attached pages
| have
| >| >indeed been updated. But when I check the pages out,
| >| they
| >| >have the old table/cell height settings.
| >| > I even published the site again, just to see what
| >| would
| >| >happen and sure enough, I saw all the audio pages get
| >| >updated as if the change was being processed. But no
| >| real
| >| >change happened. If you need to see what the table is
| >| >about, the url for one of the audio pages is:
| >| >Http://www.westwindentertainment.com/GSBaudio.htm
| >| >It's the table that has song titles and corresponding
| >| >links '14k - 56k - Dsl/Cbl' to play the audio clips. I
| >| >appreciate any help. I may be doing/not doing
| something
| >| >so stupid & obvious. Thanks for your
| help,...Brightbelt
| >| >.
| >| >
| >
| >
| >.
| >


.

 

[Stefan B Rusynko]

FP does not treat table differently in DWT
The table must be in a Non editable region for the DWT to adjust it
If the table is in an Editable region of the DWT, you need to open all the pages and edit the editable regions

--




| Hi Stefan-
| I thought I'd add some perhaps useful info - before I
| was trying to change cell/table height sizes (in pixels)
| and nothing happened - still no progress there. (I have a
| disk-based web and tried the Http method also). I have
| just now tried OTHER changes on my templates (eg,
| different alignment of photos in table cells) just to
| experiment and the pages DO get updated correctly. So
| maybe this has something more to do with FP's handling of
| tables than the templates per se ? I don't know, but
| thought I'd offer this info. Thanks,...Brightbelt
|
| >-----Original Message-----
| >DWT does not automatically update pages unless you are
| using a disc based web (or WSS)
| >
| >--
| >
| >_____________________________________________
| >SBR @ ENJOY (-: [ Microsoft MVP -
| FrontPage ]
| >"Warning - Using the F1 Key will not break anything!" (-
| ;
| >To find the best Newsgroup for FrontPage support see:
| > http://www.net-sites.com/sitebuilder/newsgroups.asp
| >_____________________________________________
| >
| >
| in message | >| Hi Stefan-
| >| Yes I saved the web page (and template) after
| changes.
| >| The web page (after changes) previews in the browser
| with
| >| the old table settings, so it's not coming thru there
| >| either. The template previews Ok in the browser (it's
| the
| >| body of a page so the shared border doesn't preview.
| The
| >| new table does come thru in the preview for the
| template
| >| though). I'm stumped, so any ideas would be very
| welcome.
| >| Thanks for your help,...Brightbelt
| >|
| >| >-----Original Message-----
| >| >Did you save the page after the changes, before
| >| publishing
| >| >_in your local what do you see in File Preview in
| Browser
| >| >
| >| >--
| >| >
| >| >_____________________________________________
| >| >SBR @ ENJOY (-: [ Microsoft MVP -
| >| FrontPage ]
| >| >"Warning - Using the F1 Key will not break
| anything!" (-
| >| ;
| >| >To find the best Newsgroup for FrontPage support see:
| >| > http://www.net-sites.com/sitebuilder/newsgroups.asp
| >| >_____________________________________________
| >| >
| >| >
| >| >"Brightbelt" <[email protected]>
| wrote
| >| in message | [email protected]...
| >| >| Hi-
| >| >| I thought I should post the changed settings etc
| I'm
| >| >| going for: the original table/cells had a table
| height
| >| of
| >| >| 240 pixels with cells 30 pixels high. The
| >| CHANGED/updated
| >| >| table has a table height of 280 pixels with cells 35
| >| >| pixels high. But the table/cells do not seem to be
| >| >| changing. Thanks,...Brightbelt
| >| >|
| >| >|
| >| >| >-----Original Message-----
| >| >| >Hi-
| >| >| > I'm on FP 2003, Win XP Pro, Pent 4. I've got a
| >| >| template
| >| >| >audio page, upon which I've made a size change of
| the
| >| >| >height in pixels for cells in a table (I also
| changed
| >| >| the
| >| >| >table height to match the new cell(s) height). The
| >| >| >template changes ok and when I save it, it
| >| asks 'would I
| >| >| >like to update the 32 attached files?'. I
| click 'Yes'
| >| >| and
| >| >| >I even see the green-dotted processing bar run its
| >| >| >course, and so it seems like all the attached pages
| >| have
| >| >| >indeed been updated. But when I check the pages
| out,
| >| >| they
| >| >| >have the old table/cell height settings.
| >| >| > I even published the site again, just to see what
| >| >| would
| >| >| >happen and sure enough, I saw all the audio pages
| get
| >| >| >updated as if the change was being processed. But
| no
| >| >| real
| >| >| >change happened. If you need to see what the table
| is
| >| >| >about, the url for one of the audio pages is:
| >| >| >Http://www.westwindentertainment.com/GSBaudio.htm
| >| >| >It's the table that has song titles and
| corresponding
| >| >| >links '14k - 56k - Dsl/Cbl' to play the audio
| clips. I
| >| >| >appreciate any help. I may be doing/not doing
| >| something
| >| >| >so stupid & obvious. Thanks for your
| >| help,...Brightbelt
| >| >| >.
| >| >| >
| >| >
| >| >
| >| >.
| >| >
| >
| >
| >.
| >

 

[Brightbelt]

Ah Ha. That's the difference. I just started to work with
templates again recently after a long absence. Thank you
for the re-education,...Brightbelt

-----Original Message-----
FP does not treat table differently in DWT
The table must be in a Non editable region for the DWT to adjust it
If the table is in an Editable region of the DWT, you

need to open all the pages and edit the editable regions

--

_____________________________________________
SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
"Warning - Using the F1 Key will not break anything!" (- ;
To find the best Newsgroup for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
_____________________________________________


"Brightbelt" <[email protected]> wrote

in message news:[email protected]...

| Hi Stefan-
| I thought I'd add some perhaps useful info - before I
| was trying to change cell/table height sizes (in pixels)
| and nothing happened - still no progress there. (I have a
| disk-based web and tried the Http method also). I have
| just now tried OTHER changes on my templates (eg,
| different alignment of photos in table cells) just to
| experiment and the pages DO get updated correctly. So
| maybe this has something more to do with FP's handling of
| tables than the templates per se ? I don't know, but
| thought I'd offer this info. Thanks,...Brightbelt
|
| >-----Original Message-----
| >DWT does not automatically update pages unless you are
| using a disc based web (or WSS)
| >
| >--
| >
| >_____________________________________________
| >SBR @ ENJOY (-: [ Microsoft MVP -
| FrontPage ]
| >"Warning - Using the F1 Key will not break anything!" (-
| ;
| >To find the best Newsgroup for FrontPage support see:
| > http://www.net-sites.com/sitebuilder/newsgroups.asp
| >_____________________________________________
| >
| >
| in message [email protected]...
| >| Hi Stefan-
| >| Yes I saved the web page (and template) after
| changes.
| >| The web page (after changes) previews in the browser
| with
| >| the old table settings, so it's not coming thru there
| >| either. The template previews Ok in the browser (it's
| the
| >| body of a page so the shared border doesn't preview.
| The
| >| new table does come thru in the preview for the
| template
| >| though). I'm stumped, so any ideas would be very
| welcome.
| >| Thanks for your help,...Brightbelt
| >|
| >| >-----Original Message-----
| >| >Did you save the page after the changes, before
| >| publishing
| >| >_in your local what do you see in File Preview in
| Browser
| >| >
| >| >--
| >| >
| >| >_____________________________________________
| >| >SBR @ ENJOY (-: [ Microsoft MVP -
| >| FrontPage ]
| >| >"Warning - Using the F1 Key will not break
| anything!" (-
| >| ;
| >| >To find the best Newsgroup for FrontPage support see:
| >| > http://www.net- sites.com/sitebuilder/newsgroups.asp
| >| >_____________________________________________
| >| >
| >| >
| >| >"Brightbelt" <[email protected]>
| wrote
| >| in message | [email protected]...
| >| >| Hi-
| >| >| I thought I should post the changed settings etc
| I'm
| >| >| going for: the original table/cells had a table
| height
| >| of
| >| >| 240 pixels with cells 30 pixels high. The
| >| CHANGED/updated
| >| >| table has a table height of 280 pixels with cells 35
| >| >| pixels high. But the table/cells do not seem to be
| >| >| changing. Thanks,...Brightbelt
| >| >|
| >| >|
| >| >| >-----Original Message-----
| >| >| >Hi-
| >| >| > I'm on FP 2003, Win XP Pro, Pent 4. I've got a
| >| >| template
| >| >| >audio page, upon which I've made a size change of
| the
| >| >| >height in pixels for cells in a table (I also
| changed
| >| >| the
| >| >| >table height to match the new cell(s) height). The
| >| >| >template changes ok and when I save it, it
| >| asks 'would I
| >| >| >like to update the 32 attached files?'. I
| click 'Yes'
| >| >| and
| >| >| >I even see the green-dotted processing bar run its
| >| >| >course, and so it seems like all the attached pages
| >| have
| >| >| >indeed been updated. But when I check the pages
| out,
| >| >| they
| >| >| >have the old table/cell height settings.
| >| >| > I even published the site again, just to see what
| >| >| would
| >| >| >happen and sure enough, I saw all the audio pages
| get
| >| >| >updated as if the change was being processed. But
| no
| >| >| real
| >| >| >change happened. If you need to see what the table
| is
| >| >| >about, the url for one of the audio pages is:
| >| >|
Http://www.westwindentertainment.com/GSBaudio.htm
| >| >| >It's the table that has song titles and
| corresponding
| >| >| >links '14k - 56k - Dsl/Cbl' to play the audio
| clips. I
| >| >| >appreciate any help. I may be doing/not doing
| >| something
| >| >| >so stupid & obvious. Thanks for your
| >| help,...Brightbelt
| >| >| >.
| >| >| >
| >| >
| >| >
| >| >.
| >| >
| >
| >
| >.
| >


.