D
Dallas Overturf
Note: I've exported the System Restore data from the Reg (below...)Thought
I had this cleared up. Removed 2nd disk from system I use as a
backup HD and the srrstr.dll problem
returned once the Disable System Restore check box was unchecked and apply
was hit.
Here is the interesting part (Assuming I correctly remember it, I'm close
anyway)...
Once that happened realized what I'd changed was to my knowledge removing a
disk (the disk has two NTFS partitions)
That disk was only temporarily hooked up so I could copy files to and from
for backup while trying to move/recover the OSS
from my original (good) 40Gb XP home boot drive which was kept as a spare
when I moved to a 120Gb.
Adding the disk back in seemed to affect using the tab (seems you can get to
it if DisableSr is ==1 in Registry)
But on adding the disk with 2 partitions it seemed to allow me to use it
(uncheck disable restore on the tab) one time
and see the 3 logical drives being monitored or not monitored inddividually.
But then on reboot the next time I toyed with that checkbox
Message comes up: Unchecking it and says: "System Restore encountered an
error trying to enable/disable one or more drives. Please restart your
machine and try again."
So it appears the previous problem I posted is still occuring and that upon
setting DisableSr in the registry I can get to the tab until I uncheck
disable on the System Restore Tab.
Text from Notepade looking reading the Export
What it's like when I Can't
access System Restore Tab)Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\SystemRestore]
"DisableSR"=dword:00000000
"CreateFirstRunRp"=dword:00000001
"DSMin"=dword:000000c8
"DSMax"=dword:00000190
"RPSessionInterval"=dword:00000000
"RPGlobalInterval"=dword:00015180
"RPLifeInterval"=dword:0076a700
"CompressionBurst"=dword:0000003c
"TimerInterval"=dword:00000078
"DiskPercent"=dword:0000000c
"ThawInterval"=dword:00000384
"RestoreDiskSpaceError"=dword:00000000
"RestoreStatus"=dword:00000001
"RestoreSafeModeStatus"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\SystemRestore\Cfg]
"DiskPercent"=dword:0000000c
"MachineGuid"="{54821E51-14E3-4D65-88B0-15D728F6947B}"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\SystemRestore\SnapshotCallbacks]
@=""
<<<<<<<<<<<<<<END>>>>>>>>>>
Thanks for any further
help/suggestions on this! Dallas...
--
Home Page: www.geocities.com/d_overturf
Replies regarding News Group messages to me may get a challenge verifier
back. (CHAP).
The Sender may be >
Subject: [Challenge Response] Confirm your email by visiting this URL
https://smtp.stowetel.com/challenge/... SomeURL.
If so you need to Click on the link in the challenge and do what it says.
This is usually a one time deal.
---------------------------------------------------------------------------------------------------------------------------
I had this cleared up. Removed 2nd disk from system I use as a
backup HD and the srrstr.dll problem
returned once the Disable System Restore check box was unchecked and apply
was hit.
Here is the interesting part (Assuming I correctly remember it, I'm close
anyway)...
Once that happened realized what I'd changed was to my knowledge removing a
disk (the disk has two NTFS partitions)
That disk was only temporarily hooked up so I could copy files to and from
for backup while trying to move/recover the OSS
from my original (good) 40Gb XP home boot drive which was kept as a spare
when I moved to a 120Gb.
Adding the disk back in seemed to affect using the tab (seems you can get to
it if DisableSr is ==1 in Registry)
But on adding the disk with 2 partitions it seemed to allow me to use it
(uncheck disable restore on the tab) one time
and see the 3 logical drives being monitored or not monitored inddividually.
But then on reboot the next time I toyed with that checkbox
Message comes up: Unchecking it and says: "System Restore encountered an
error trying to enable/disable one or more drives. Please restart your
machine and try again."
So it appears the previous problem I posted is still occuring and that upon
setting DisableSr in the registry I can get to the tab until I uncheck
disable on the System Restore Tab.
Text from Notepade looking reading the Export
What it's like when I Can'taccess System Restore Tab)Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\SystemRestore]
"DisableSR"=dword:00000000
"CreateFirstRunRp"=dword:00000001
"DSMin"=dword:000000c8
"DSMax"=dword:00000190
"RPSessionInterval"=dword:00000000
"RPGlobalInterval"=dword:00015180
"RPLifeInterval"=dword:0076a700
"CompressionBurst"=dword:0000003c
"TimerInterval"=dword:00000078
"DiskPercent"=dword:0000000c
"ThawInterval"=dword:00000384
"RestoreDiskSpaceError"=dword:00000000
"RestoreStatus"=dword:00000001
"RestoreSafeModeStatus"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\SystemRestore\Cfg]
"DiskPercent"=dword:0000000c
"MachineGuid"="{54821E51-14E3-4D65-88B0-15D728F6947B}"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\SystemRestore\SnapshotCallbacks]
@=""
<<<<<<<<<<<<<<END>>>>>>>>>>
Thanks for any further
help/suggestions on this! Dallas...
--
Home Page: www.geocities.com/d_overturf
Replies regarding News Group messages to me may get a challenge verifier
back. (CHAP).
The Sender may be >
Subject: [Challenge Response] Confirm your email by visiting this URL
https://smtp.stowetel.com/challenge/... SomeURL.
If so you need to Click on the link in the challenge and do what it says.
This is usually a one time deal.
---------------------------------------------------------------------------------------------------------------------------