System Building ??? w/A7N8X 2.0

A

Art C.

I'm building a system with an A7N8X Deluxe 2.0 bios 1007, AMD Barton
3000+/400mhz 2.10ghz and Corsair XMS 512MB 32X8 PC 3500C 2PT-DDR 400mhz
(Two Sticks) Antec Case 500w-ps with Swiftech cooling.

Is this type of memory suitable for the above mobo and cpu? If so, what are
the user define settings in the bios to clock the system up a little bit?
What ratio would you use for overclocking like Mem timing, FSB setting,
Clock setting, so on...

Thanks for some input,

Art C.
 
B

Ben Pope

Art said:
I'm building a system with an A7N8X Deluxe 2.0 bios 1007, AMD Barton
3000+/400mhz 2.10ghz and Corsair XMS 512MB 32X8 PC 3500C 2PT-DDR
400mhz (Two Sticks) Antec Case 500w-ps with Swiftech cooling.

Is this type of memory suitable for the above mobo and cpu? If so, what
are the user define settings in the bios to clock the system up a little
bit? What ratio would you use for overclocking like Mem timing, FSB
setting, Clock setting, so on...

I think that memory is rated for something like 7-3-3-2 at 217MHz?

Probably best to up the FSB (leaving the multiplier alone, or dropping it
one or two notches, depending on stability)

Either that or you could try reducing one or more of the '3's to 2, at
200MHz, but that probably won't make as much of a difference as the extra
10% or so in the FSB.

Ben
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top