STOP Error

M

Maxi

Whenever I try to boot to safe mode I get the error message given
below. Normal boot works fine. Computer works fine. It just does not
allow me to go into safe mode.

Additional Info:
I am using 32MB NVIDIA RIVA TNT2 Model64 video card in the AGP slot of
my Intel 815 Chipset motherboard.
BIOS: Award Modular BIOS 6.00PG, An Energy Star Ally Copyright (c)
1984-2001, Award Software, Inc. BIOS-I-2M (2K010419)

ERROR MESSAGE:
==============

When I select Safe Mode, it goes upto

multi(0)disk(0)rdisk(0)partition(1)\Windows\System32\FastFat.sys
multi(0)disk(0)rdisk(0)partition(1)\Windows\System32\KSecDD.sys
multi(0)disk(0)rdisk(0)partition(1)\Windows\System32\ndis.sys
multi(0)disk(0)rdisk(0)partition(1)\Windows\System32\mup.sys
multi(0)disk(0)rdisk(0)partition(1)\Windows\System32\agp440.sys

and then pops up the below error message

A problem has been detected and windows has been shut down to prevent
damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you have seen this STOP error screen,
restrart your computer. If this screen appears again, follow these
steps:

Check to make sure any new hardware or software is properly installed.
If ths is a new installation, ask your hardware or software
manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or
software. Disable BIOS memory options such as caching or shadowing. If
you need to use safe mode to remove or disable components, restart your
computer, press F8 to select Advanced Startup Options and then select
safe mode.

Technical information:
*** STOP: 0X0000000A (0XF9F49354, 0X000000FF, 0X00000001, 0X8050FD7F)
 
M

Mistoffolees

Maxi said:
Whenever I try to boot to safe mode I get the error message given
below. Normal boot works fine. Computer works fine. It just does not
allow me to go into safe mode.

Additional Info:
I am using 32MB NVIDIA RIVA TNT2 Model64 video card in the AGP slot of
my Intel 815 Chipset motherboard.
BIOS: Award Modular BIOS 6.00PG, An Energy Star Ally Copyright (c)
1984-2001, Award Software, Inc. BIOS-I-2M (2K010419)

ERROR MESSAGE:
==============

When I select Safe Mode, it goes upto

multi(0)disk(0)rdisk(0)partition(1)\Windows\System32\FastFat.sys
multi(0)disk(0)rdisk(0)partition(1)\Windows\System32\KSecDD.sys
multi(0)disk(0)rdisk(0)partition(1)\Windows\System32\ndis.sys
multi(0)disk(0)rdisk(0)partition(1)\Windows\System32\mup.sys
multi(0)disk(0)rdisk(0)partition(1)\Windows\System32\agp440.sys

and then pops up the below error message

A problem has been detected and windows has been shut down to prevent
damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you have seen this STOP error screen,
restrart your computer. If this screen appears again, follow these
steps:

Check to make sure any new hardware or software is properly installed.
If ths is a new installation, ask your hardware or software
manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or
software. Disable BIOS memory options such as caching or shadowing. If
you need to use safe mode to remove or disable components, restart your
computer, press F8 to select Advanced Startup Options and then select
safe mode.

Technical information:
*** STOP: 0X0000000A (0XF9F49354, 0X000000FF, 0X00000001, 0X8050FD7F)
Does these look familiar ---

http://www.thennews.com/a/n14/XP Blue screen IRQL_NOT_LESS_OR_EQUAL.php

http://www.mcse.ms/message1255230.html

There are 61 hits on Google whilst searching for 0x8050FD7F.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Won't boot 1
recovery of hard drive 1
editing the boot.ini file 8
boot.ini 13
boot loader for dual boot 3
dual boot 2 HD's 14
Boot.INI 10
can't boot my second system help please 1

Top