SPREADSHEET DATA

[Guest]

I take data of temperatures and at the bottom I use the formula to find the
maximum temperatures for each column of my spreadsheet, which has about 150
columns. Once I get the maximum temperatures I then physically write all the
temperatures down and then I type them in on another spreadsheet that
summarizes the temperatures on what you would call a summary sheet. How can
I eliminate having to handwrite these temperature down? Can I put these max.
temperatures directly on the summary sheet?
Thanks,
Kim

 

[swatsp0p]

Assuming your formula for finding the max in each column is in row 100
on sheet1, on sheet2 (your summary sheet) simply use the formula:

cell A1 =sheet1!A100

and copy this across 150 columns (therefore, B1=sheet1!B100, etc.).
You can now apply any desired formulas to this range (average, sum,
etc.)

Of course, you could also do a copy/paste special>values if the data is
not dynamic (you won't be changing any numbers in the data range).

Does this work for you?

Bruce

 

[Guest]

Is their a way to copy data that's going horizontal and pasting it vertically?
Thanks,
Kim

 

[Guest]

I tried and I had to cut and paste, but it removed the data from my
spreadsheet. How can I keep my data from being removed. If I copy/paste I
get #REF! in my cells.
Thanks,
Kim

Is their a way to copy data that's going horizontal and pasting it vertically?
Thanks,
Kim

 

[Guest]

I figured out how to keep my data after I cut/paste when I close my
spreadsheet if I don't save changes it will be there. I can't figure out how
to go from horizontal to vertical when copying data.
Thanks,
Kim

I tried and I had to cut and paste, but it removed the data from my
spreadsheet. How can I keep my data from being removed. If I copy/paste I
get #REF! in my cells.
Thanks,
Kim

 

[Guest]

Use 'Paste Special' - at the bottom of the pop up there is a check box called
"Transpose".
This will switch from horizontal to vertical or vice-versa.

Hope this helps.

Is their a way to copy data that's going horizontal and pasting it vertically?
Thanks,
Kim

 

[swatsp0p]

In addition to checking the 'transpose' box when doing Copy/Past
Special... select Paste: Values. This will paste the contents of th
cell instead of the formulas (which may result in the #ref error).

Good Luck

Bruc

 

[Guest]

Thanks for all your help these shortcuts will save me lots of time.
Thanks,
Kim