(SP2 Preview) 7B Error With ACPI Multiprocessor PC

  • Thread starter Thread starter Gereon
  • Start date Start date
G

Gereon

I tried to upgrade a working (before SP2 Preview) .slx file. I now get a 7B
error after the reboot. The image was using ACPI Multiprocessor PC. If I
switch to Standard PC component, I do not get the error.

After that, I followed the same procedure that I used to make the old image
(Ran TAP, imported the results, etc.) and built a fresh .slx file from
scratch. Same 7B problem.

Does this ring any bells for anyone?
 
Gereon,

Quick question.. When you upgrade you Configuration do you check the settings of your components and Configuration (especially the
Target Device Settings)?
There is a bug in SP1 and SP2 TP (will be fixed in RTM) that it loses all the components settings when you do the upgrade.
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Another (possibly new) Stop 7b question 3
ACPI Uniprocessor & ACPI Multiprocessor 2
Stop Error 7b at change from Standard PC to ACPI 2
ACPI Uniprocessor and ACPI Multiprocessor image on the same build. 1
Bugcheck 7B -MS ID 6 10
ACPI Components Probem 1
El Torito CD with ACPI device 3
STOP 7B error during boot up 3

Back
Top