sp2 firewall: ftp reply packets are being dropped

  • Thread starter Thread starter Jan Wessely
  • Start date Start date
J

Jan Wessely

I'm unable to make any outgoing FTP connection while the WinXP SP2
firewall is enabled. I have added my ftp client (filezilla) to the
firewall program exceptions and tried both active and passive transfers.
Same with the builtin system32\ftp.exe.

pfirewall.log says:
2004-10-07 14:12:25 DROP TCP XXX.XXX.XXX.XXX YYY.YYY.YYY.YYY 21 3222 108
FAP 901233620 813002509 5840 - - - RECEIVE

where XXX... is the FTP server's IP
and YYY... is my IP

Only when I disable the winxp firewall everything works fine.
Note that I'm connected to the internet through a linux iptables NAT
computer.

Any help on this?
TIA, jan
 
Perhaps the troubleshooting information in this article may help:

You may not be able to open a project when you try to connect to a remote Windows XP
Service Pack 2-based computer by using the AutoCAD FTP service
http://support.microsoft.com/default.aspx?scid=kb;en-us;873185&Product=windowsxpsp2

Here's how to correct the problem after opening Port 21 via the
SP2 firewall Exceptions tab:

1. Open Internet Explorer >Tools > Internet Options > Advanced tab

2. Uncheck the box: "Use passive FTP (for firewall & DSL modem capability)

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect Your PC!
http://www.microsoft.com/athome/security/protect/default.aspx

-----------------------------------------------------------------------------

:

| I'm unable to make any outgoing FTP connection while the WinXP SP2
| firewall is enabled. I have added my ftp client (filezilla) to the
| firewall program exceptions and tried both active and passive transfers.
| Same with the builtin system32\ftp.exe.
|
| pfirewall.log says:
| 2004-10-07 14:12:25 DROP TCP XXX.XXX.XXX.XXX YYY.YYY.YYY.YYY 21 3222 108
| FAP 901233620 813002509 5840 - - - RECEIVE
|
| where XXX... is the FTP server's IP
| and YYY... is my IP
|
| Only when I disable the winxp firewall everything works fine.
| Note that I'm connected to the internet through a linux iptables NAT
| computer.
|
| Any help on this?
| TIA, jan
 
Carey said:
Perhaps the troubleshooting information in this article may help:

You may not be able to open a project when you try to connect to a remote Windows XP
Service Pack 2-based computer by using the AutoCAD FTP service
http://support.microsoft.com/default.aspx?scid=kb;en-us;873185&Product=windowsxpsp2
hi carey,

thank you for your reply, but...

No this didn't help, because the problem described there is a winxp
firewall running on the SERVER side, my problem is running the firewall
on the CLIENT side.
Here's how to correct the problem after opening Port 21 via the
SP2 firewall Exceptions tab:

1. Open Internet Explorer >Tools > Internet Options > Advanced tab

2. Uncheck the box: "Use passive FTP (for firewall & DSL modem capability)

As I stated in my prev. posting, I have tried both active and passive
transfers.

I didn't use IE at all, I used filezilla and the command line ftp.exe.
(Tried IE now and it's the same problem as with the other ftp clients
regardless of the active/passive setting)

j
 
Back
Top