SMC Wireless router to Wireless router

T

tydixon1

Hello,

We have a setup in the house with a SMC wireless router connected to
another SMC wireless router. Both routers are SMC Barricade. It was
working fine and then one of the router got reset.

Now the router that acted as the client can't access the wirless
router with the internet connection.

Is there anything about the settings that I am missing? I tried to use
WDS to bridge the 2 routers but must be missing something.

The guy who set this up is no longer around.

Thanks.
 
J

Jack \(MVP-Networking\).

The source Router has to be configured normally, as infrastructure Wireless.
Resetting the second Router put it back to the default infrastructure mode.
Configure the second Router as Client or WDS, or what Mode it use to be.
Jack (MVP-Networking).
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

wireless router to wireless router - can any consumer routers dothis? 6
Dialup modem on router 2
wireless connection 6
Connecting Wireless Router to Wired Router 5
Using two routers in home network 1
Adding a wireless router 10
How to use Network Key on WiFi Router 3
Wireless XP notebook and Linksys router don't work 1

Top