Slow Boot - "Did not load Driver"

M

MPS

Hi all,

VSITA Home Premium, 2GB, Dual Intel 4300, 1.8GHZ, 1000+ GB

Recently booting took 5 minutes.
Running Boot Logging in the nbtlog.txt I discovered hundreds of "Did not load drivers" over and
over again.

Someone hinted to set in
MSCONFIG | tab Computer startup | "Advanced Startup" > Processors to: 2 and > "Max Memory" to: 2GB.
PCI, Detect HAL, Error detect: ALL set to OFF.

Since boot is down to 2'30" which is better but not impressive.
Between the INTEL logo and black/white bootscreen it seems to be sitting doing nothing.
Then after 2' the VISTA curtain opens and after some 20 seconds I see my Desktop appear.

In bootlog however I still find 2 sets of consistently repeated missed "did not load driver":

Loaded driver \SystemRoot\system32\DRIVERS\kbdhid.sys
Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS
Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
Loaded driver \SystemRoot\system32\drivers\RTKVHDA.sys
Loaded driver \SystemRoot\System32\Drivers\Fs_Rec.SYS

AND towards the end of the list

Loaded driver \SystemRoot\System32\DRIVERS\srv2.sys
Loaded driver \SystemRoot\System32\DRIVERS\srv.sys
Did not load driver \SystemRoot\System32\DRIVERS\srv.sys
Loaded driver \SystemRoot\system32\DRIVERS\parvdm.sys
Loaded driver \SystemRoot\system32\drivers\peauth.sys

Could these be causing the extra wasted say 2 minutes of booting?
Why would the same line try to load and not load AFTER it was loaded anyway?

Curious,
Maria
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top