Single Adapter 2003 server as VPN Router (site-to-site)

[scott]

Single Adapter 2003 server as VPN Router (site-to-site)


Hi,

Im looking for idocumentaion specifically on how to setup a "Single-Adapter
VPN Router" for a site-to-site PPTP connection between 2 x 2003 servers.

NOTE: Assuming public WAN IP held by firewall external address.
NOTE: Also assumes that the LAN clients must use the 2003 VPN server as a
Gateway.

Thanks for any information it all helps.
Scott

 

[Srivatsan [MSFT]]

Check the following document for general site-to-side VPN deployment:
http://www.microsoft.com/technet/prodtechnol/windowsserver2003/technologies/networking/vpndpls2.mspx

It has a specific topic called "Single-Adapter VPN Router" for your
scenario.

I hope this helps.

 

[scott]

Hi,

Thanks for the response. I examined that document earlier but it didn't
really tell me enough about Single Adapter Site to Site on 2003.

Thanks
Scott.