Shut down problem - wfet profram not responding

[Larry Corbett]

I recently began to have problems shutting down my
operating syste. When I hit the sut down command, a
message comes up saying "wfet program is not responding".
I click the Ok button and the program is deleted. If I do
not do this my operating system gets stuck and does not
shut dowm.

I do not know what this program is?

Help.

 

[Jim Byrd]

Hi Larry - You've got a hijacker, and you may need some help getting rid of
it. You kinda need to know what the parasite(s) is/are before you can do
much about fixing them except to apply some general tools like AdAware
and/or SpyBot S&D (see below). If they don't fix it (and they may not for
this particular one yet), then start here:

Download HijackThis, free, here:
http://www.spywareinfo.com/~merijn/files/hijackthis.zip (Always download a
new fresh copy of HijackThis [and CWShredder also] - It's updated
frequently.)

Unzip it to any convenient folder, start it then press Scan. Click on
SaveLog when it's finished which will create hijackthis.log. Now click the
Config button, then Misc Tools and click on Generate StartupList.log which
will create Startuplist.txt

Then go to one of the following forums:

Spyware and Hijackware Removal Support, here:
http://www.spywareinfo.com/forums/index.php?s=8a236cdf61469fbad3bddbe810be0374&act=SF&f=11

or Net-Integration here:
http://www.net-integration.net/cgi-...86d536d57b5f65b6e40c55365e;act=ST;f=27;t=6949

or Tom Coyote here:
http://tomcoyote.org/forums/index.php?act=ST&f=10&t=495&s=2c6e92805e310b519b9fa61cc7098fba

Sign in, then copy and paste both files into a message asking for
assistance, Someone will answer with detailed instructions for the removal
of your parasite(s).


For the general hijack case, the best way to start is to get Ad-Aware 6.0,
Build 181 or later, here: http://www.lavasoftusa.com/support/download/.
Update and run this regularly to get rid of most "spyware/hijackware" on
your machine. If it has to fix things, be sure to re-boot and rerun
AdAware again and repeat this cycle until you get a clean scan. The reason
is that it may have to remove things which are currently "in use" before it
can then clean up others.

Another excellent program for this purpose is SpyBot Search and Destroy
available here: http://security.kolla.de/ SpyBot Support Forum here:
http://www.net-integration.net/cgi-bin/forums/ikonboard.cgi. I recommend
using both normally. After fixing things with SpyBot S&D, be sure to
re-boot and rerun SpyBot again and repeat this cycle until you get a clean
"no red" scan. The reason is that SpyBot sometimes has to remove things
which are currently "in use" before it can then clean up others.


Note that sometimes you need to make a judgement call about what these
programs report as spyware. See here, for example:
http://www.imilly.com/alexa.htm


--
Please respond in the same thread.
Regards, Jim Byrd, MS-MVP



In