Showing a break in the Y axis

G

Guest

Can I adjust the vertical Y axis to show some physical break into two
parts?...the lower part, showing the 0 mark at the base of the Y axis, then
above the break (the break indicated by something like a couple lightning
bolt lines one above the other), I want the y axis to start at 10, then go
up to 15, 20 ...I want to emphasize a rising dramatic line trend from say 10
to 20 yet still see the zero tick on the Y axis...the values the line is
based on range from 10 to 20, but if you show the zero on the y axis , the
line looks more flat that plotting it from a scale of 10 to 20.

Thank you

Craig
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Make Y-axis values correspond to x- axis value 1
Suppress higher values in y-axis 1
how to make break the y axis for the in the line chart 3
Placing an Axis Break on the Y axis 1
Formatting 'X' Axis -- 2 fundamental differences 7
Reverse y-axis, with maximum number at x-axis 1
$values on y axis % change on x axis 2
Y-axis tick marks 2

Top