sharing gone after winnt.sif CD setup?

G

Guest

Hi,

I am loading a pc from the Win2k Pro CD using a floppy to feed it the
answers via winnt.sif.
On completion, I log in as administrator, open Explorer, right-click either
the root of C:\ or any folder and I am not presented with any sharing options
as I would normally expect.
I tested doing a "normal" install and manually entering the information and
the sharing tab was present under those circumstances. But I don't want to
have to do a manual install every time. (Point of unattend setup is to walk
away isn't it?<grin>)
So my question is, which part of the answer file dictates this change and
how do I reverse it.
I want to be able to remotely mount my client's admin shares but this answer
file does something to prevent this.
Thanks in advance.

Answer file follows:

<a:\winnt.sif>

;SetupMgrTag
[Data]
AutoPartition=1
MsDosInitiated="0"
UnattendedInstall="Yes"

[Unattended]
UnattendMode=FullUnattended
OemSkipEula=Yes
OemPreinstall=No
TargetPath=\WINNT
DriverSigningPolicy=Ignore
ExtendOemPartition=1
FileSystem=ConvertNTFS

[GuiUnattended]
AdminPassword=xxxxx
OEMSkipRegional=1
TimeZone=4
OemSkipWelcome=1

[UserData]
FullName=Staff
OrgName="Bullock Baur Associates"
ComputerName=WSname
ProductID=(cd key)

[Display]
BitsPerPel=8
Xresolution=800
YResolution=600
Vrefresh=60

[TapiLocation]
CountryCode=107
Dialing=Tone
AreaCode=250

[RegionalSettings]
LanguageGroup=1
SystemLocale=00001009
UserLocale=00001009
InputLocale=0409:00000409

[Branding]
BrandIEUsingUnattended=Yes



[Proxy]
Proxy_Enable=0
Use_Same_Proxy=1

[Identification]
JoinDomain=domainname
DomainAdmin=xxxxxx
DomainAdminPassword=xxxxx

[Networking]
InstallDefaultComponents=No

[NetAdapters]
Adapter1=params.Adapter1

[params.Adapter1]
INFID=*

[NetClients]
MS_MSClient=params.MS_MSClient

[NetProtocols]
MS_TCPIP=params.MS_TCPIP

[params.MS_TCPIP]
DNS=Yes
UseDomainNameDevolution=No
EnableLMHosts=No
AdapterSections=params.MS_TCPIP.Adapter1

[params.MS_TCPIP.Adapter1]
SpecificTo=Adapter1
DHCP=Yes
SubnetMask=255.255.255.0
DefaultGateway=xxx.xxx.xxx.xxx
DNSServerSearchOrder=xxx.xxx.xxx.xxx
WINS=No
NetBIOSOptions=1

[Components]
accessopt=Off
calc=On
cdplayer=On
certsrv=Off
certsrv_client=Off
certsrv_server=Off
charmap=On
chat=Off
cluster=Off
deskpaper=Off
dialer=Off
fp=Off
freecell=On
hypertrm=Off
iis_common=Off
iisdbg=Off
iis_doc=Off
iis_ftp=Off
iis_htmla=Off
iis_inetmgr=Off
iis_nntp=Off
iis_nntp_docs=Off
iis_pwmgr=Off
iis_smtp=Off
iis_smtp_docs=Off
iis_www=Off
indexsrv_system=Off
LicenseServer=Off
media_clips=Off
media_utopia=Off
minesweeper=On
mousepoint=On
mplay=Off
msmq=Off
mswordpad=On
netcis=Off
netoc=Off
objectpkg=Off
paint=On
pinball=Off
rec=Off
reminst=Off
rstorage=Off
solitaire=On
templates=Off
TSClients=Off
TSEnable=Off
vol=On
 
J

John John

[NetServices]
MS_Server=params.MS_Server

or perhaps:

[NetServices]
MS_Server = params.MSFP

John

Marvin said:
Hi,

I am loading a pc from the Win2k Pro CD using a floppy to feed it the
answers via winnt.sif.
On completion, I log in as administrator, open Explorer, right-click either
the root of C:\ or any folder and I am not presented with any sharing options
as I would normally expect.
I tested doing a "normal" install and manually entering the information and
the sharing tab was present under those circumstances. But I don't want to
have to do a manual install every time. (Point of unattend setup is to walk
away isn't it?<grin>)
So my question is, which part of the answer file dictates this change and
how do I reverse it.
I want to be able to remotely mount my client's admin shares but this answer
file does something to prevent this.
Thanks in advance.

Answer file follows:

<a:\winnt.sif>

;SetupMgrTag
[Data]
AutoPartition=1
MsDosInitiated="0"
UnattendedInstall="Yes"

[Unattended]
UnattendMode=FullUnattended
OemSkipEula=Yes
OemPreinstall=No
TargetPath=\WINNT
DriverSigningPolicy=Ignore
ExtendOemPartition=1
FileSystem=ConvertNTFS

[GuiUnattended]
AdminPassword=xxxxx
OEMSkipRegional=1
TimeZone=4
OemSkipWelcome=1

[UserData]
FullName=Staff
OrgName="Bullock Baur Associates"
ComputerName=WSname
ProductID=(cd key)

[Display]
BitsPerPel=8
Xresolution=800
YResolution=600
Vrefresh=60

[TapiLocation]
CountryCode=107
Dialing=Tone
AreaCode=250

[RegionalSettings]
LanguageGroup=1
SystemLocale=00001009
UserLocale=00001009
InputLocale=0409:00000409

[Branding]
BrandIEUsingUnattended=Yes



[Proxy]
Proxy_Enable=0
Use_Same_Proxy=1

[Identification]
JoinDomain=domainname
DomainAdmin=xxxxxx
DomainAdminPassword=xxxxx

[Networking]
InstallDefaultComponents=No

[NetAdapters]
Adapter1=params.Adapter1

[params.Adapter1]
INFID=*

[NetClients]
MS_MSClient=params.MS_MSClient

[NetProtocols]
MS_TCPIP=params.MS_TCPIP

[params.MS_TCPIP]
DNS=Yes
UseDomainNameDevolution=No
EnableLMHosts=No
AdapterSections=params.MS_TCPIP.Adapter1

[params.MS_TCPIP.Adapter1]
SpecificTo=Adapter1
DHCP=Yes
SubnetMask=255.255.255.0
DefaultGateway=xxx.xxx.xxx.xxx
DNSServerSearchOrder=xxx.xxx.xxx.xxx
WINS=No
NetBIOSOptions=1

[Components]
accessopt=Off
calc=On
cdplayer=On
certsrv=Off
certsrv_client=Off
certsrv_server=Off
charmap=On
chat=Off
cluster=Off
deskpaper=Off
dialer=Off
fp=Off
freecell=On
hypertrm=Off
iis_common=Off
iisdbg=Off
iis_doc=Off
iis_ftp=Off
iis_htmla=Off
iis_inetmgr=Off
iis_nntp=Off
iis_nntp_docs=Off
iis_pwmgr=Off
iis_smtp=Off
iis_smtp_docs=Off
iis_www=Off
indexsrv_system=Off
LicenseServer=Off
media_clips=Off
media_utopia=Off
minesweeper=On
mousepoint=On
mplay=Off
msmq=Off
mswordpad=On
netcis=Off
netoc=Off
objectpkg=Off
paint=On
pinball=Off
rec=Off
reminst=Off
rstorage=Off
solitaire=On
templates=Off
TSClients=Off
TSEnable=Off
vol=On
Click to expand...
http:// [Proxy] Proxy_Enable=0 Use...ff TSClients=Off TSEnable=Off vol=On [/QUOTE][/QUOTE]
 
G

Guest

Hi John John,

SOLVED!

The following section needed to be added to enable the server service:

[NetServices]
MS_Server = params.MSServer

;config MS File and Print Service
[params.MSServer]
Optimization = Balance

Hopefully this post will help someone else and save them all the Googling...

Thanks for the help!
Marvin Martian

John John said:
[NetServices]
MS_Server=params.MS_Server

or perhaps:

[NetServices]
MS_Server = params.MSFP

John

Marvin said:
Hi,

I am loading a pc from the Win2k Pro CD using a floppy to feed it the
answers via winnt.sif.
On completion, I log in as administrator, open Explorer, right-click either
the root of C:\ or any folder and I am not presented with any sharing options
as I would normally expect.
I tested doing a "normal" install and manually entering the information and
the sharing tab was present under those circumstances. But I don't want to
have to do a manual install every time. (Point of unattend setup is to walk
away isn't it?<grin>)
So my question is, which part of the answer file dictates this change and
how do I reverse it.
I want to be able to remotely mount my client's admin shares but this answer
file does something to prevent this.
Thanks in advance.

Answer file follows:

<a:\winnt.sif>

;SetupMgrTag
[Data]
AutoPartition=1
MsDosInitiated="0"
UnattendedInstall="Yes"

[Unattended]
UnattendMode=FullUnattended
OemSkipEula=Yes
OemPreinstall=No
TargetPath=\WINNT
DriverSigningPolicy=Ignore
ExtendOemPartition=1
FileSystem=ConvertNTFS

[GuiUnattended]
AdminPassword=xxxxx
OEMSkipRegional=1
TimeZone=4
OemSkipWelcome=1

[UserData]
FullName=Staff
OrgName="Bullock Baur Associates"
ComputerName=WSname
ProductID=(cd key)

[Display]
BitsPerPel=8
Xresolution=800
YResolution=600
Vrefresh=60

[TapiLocation]
CountryCode=107
Dialing=Tone
AreaCode=250

[RegionalSettings]
LanguageGroup=1
SystemLocale=00001009
UserLocale=00001009
InputLocale=0409:00000409

[Branding]
BrandIEUsingUnattended=Yes



[Proxy]
Proxy_Enable=0
Use_Same_Proxy=1

[Identification]
JoinDomain=domainname
DomainAdmin=xxxxxx
DomainAdminPassword=xxxxx

[Networking]
InstallDefaultComponents=No

[NetAdapters]
Adapter1=params.Adapter1

[params.Adapter1]
INFID=*

[NetClients]
MS_MSClient=params.MS_MSClient

[NetProtocols]
MS_TCPIP=params.MS_TCPIP

[params.MS_TCPIP]
DNS=Yes
UseDomainNameDevolution=No
EnableLMHosts=No
AdapterSections=params.MS_TCPIP.Adapter1

[params.MS_TCPIP.Adapter1]
SpecificTo=Adapter1
DHCP=Yes
SubnetMask=255.255.255.0
DefaultGateway=xxx.xxx.xxx.xxx
DNSServerSearchOrder=xxx.xxx.xxx.xxx
WINS=No
NetBIOSOptions=1

[Components]
accessopt=Off
calc=On
cdplayer=On
certsrv=Off
certsrv_client=Off
certsrv_server=Off
charmap=On
chat=Off
cluster=Off
deskpaper=Off
dialer=Off
fp=Off
freecell=On
hypertrm=Off
iis_common=Off
iisdbg=Off
iis_doc=Off
iis_ftp=Off
iis_htmla=Off
iis_inetmgr=Off
iis_nntp=Off
iis_nntp_docs=Off
iis_pwmgr=Off
iis_smtp=Off
iis_smtp_docs=Off
iis_www=Off
indexsrv_system=Off
LicenseServer=Off
media_clips=Off
media_utopia=Off
minesweeper=On
mousepoint=On
mplay=Off
msmq=Off
mswordpad=On
netcis=Off
netoc=Off
objectpkg=Off
paint=On
pinball=Off
rec=Off
reminst=Off
rstorage=Off
solitaire=On
templates=Off
TSClients=Off
TSEnable=Off
vol=On
Click to expand...

Click to expand...
http:// [Proxy] Proxy_Enable=0 Use...nts=Off TSEnable=Off vol=On [/QUOTE] [/QUOTE][/QUOTE][/QUOTE]
 
J

John John

You're welcome. Thanks for the follow up. I'm archiving this one!
Then if someone else asks I'll just have to google through my stored
messages...

Now, if only you (or a scripting guru) could somehow script that into a
longon script many network administrators would be happy to know how to
remotely enable file and printer sharing. I wonder if those "MS
Scripting Guys" read these these newsgroups. Probably not, they seem to
be always be goofing around... Nice job if you're smart enough to get
it. Hey, if you guys are reading we go to your site now and then, and
that's why we know you goof around, you told us so!

John

PS. Maybe the scripting guys don't want to tell us because of security
concerns. Eventually someone will figure it out.

This message was generated by Scriptomatic and will now self destruct.
Then Tweakomatic will automatically recreate it.

Marvin said:
Hi John John,

SOLVED!

The following section needed to be added to enable the server service:

[NetServices]
MS_Server = params.MSServer

;config MS File and Print Service
[params.MSServer]
Optimization = Balance

Hopefully this post will help someone else and save them all the Googling...

Thanks for the help!
Marvin Martian

:

[NetServices]
MS_Server=params.MS_Server

or perhaps:

[NetServices]
MS_Server = params.MSFP

John

Marvin Martian wrote:

Hi,

I am loading a pc from the Win2k Pro CD using a floppy to feed it the
answers via winnt.sif.
On completion, I log in as administrator, open Explorer, right-click either
the root of C:\ or any folder and I am not presented with any sharing options
as I would normally expect.
I tested doing a "normal" install and manually entering the information and
the sharing tab was present under those circumstances. But I don't want to
have to do a manual install every time. (Point of unattend setup is to walk
away isn't it?<grin>)
So my question is, which part of the answer file dictates this change and
how do I reverse it.
I want to be able to remotely mount my client's admin shares but this answer
file does something to prevent this.
Thanks in advance.

Answer file follows:

<a:\winnt.sif>

;SetupMgrTag
[Data]
AutoPartition=1
MsDosInitiated="0"
UnattendedInstall="Yes"

[Unattended]
UnattendMode=FullUnattended
OemSkipEula=Yes
OemPreinstall=No
TargetPath=\WINNT
DriverSigningPolicy=Ignore
ExtendOemPartition=1
FileSystem=ConvertNTFS

[GuiUnattended]
AdminPassword=xxxxx
OEMSkipRegional=1
TimeZone=4
OemSkipWelcome=1

[UserData]
FullName=Staff
OrgName="Bullock Baur Associates"
ComputerName=WSname
ProductID=(cd key)

[Display]
BitsPerPel=8
Xresolution=800
YResolution=600
Vrefresh=60

[TapiLocation]
CountryCode=107
Dialing=Tone
AreaCode=250

[RegionalSettings]
LanguageGroup=1
SystemLocale=00001009
UserLocale=00001009
InputLocale=0409:00000409

[Branding]
BrandIEUsingUnattended=Yes



[Proxy]
Proxy_Enable=0
Use_Same_Proxy=1

[Identification]
JoinDomain=domainname
DomainAdmin=xxxxxx
DomainAdminPassword=xxxxx

[Networking]
InstallDefaultComponents=No

[NetAdapters]
Adapter1=params.Adapter1

[params.Adapter1]
INFID=*

[NetClients]
MS_MSClient=params.MS_MSClient

[NetProtocols]
MS_TCPIP=params.MS_TCPIP

[params.MS_TCPIP]
DNS=Yes
UseDomainNameDevolution=No
EnableLMHosts=No
AdapterSections=params.MS_TCPIP.Adapter1

[params.MS_TCPIP.Adapter1]
SpecificTo=Adapter1
DHCP=Yes
SubnetMask=255.255.255.0
DefaultGateway=xxx.xxx.xxx.xxx
DNSServerSearchOrder=xxx.xxx.xxx.xxx
WINS=No
NetBIOSOptions=1

[Components]
accessopt=Off
calc=On
cdplayer=On
certsrv=Off
certsrv_client=Off
certsrv_server=Off
charmap=On
chat=Off
cluster=Off
deskpaper=Off
dialer=Off
fp=Off
freecell=On
hypertrm=Off
iis_common=Off
iisdbg=Off
iis_doc=Off
iis_ftp=Off
iis_htmla=Off
iis_inetmgr=Off
iis_nntp=Off
iis_nntp_docs=Off
iis_pwmgr=Off
iis_smtp=Off
iis_smtp_docs=Off
iis_www=Off
indexsrv_system=Off
LicenseServer=Off
media_clips=Off
media_utopia=Off
minesweeper=On
mousepoint=On
mplay=Off
msmq=Off
mswordpad=On
netcis=Off
netoc=Off
objectpkg=Off
paint=On
pinball=Off
rec=Off
reminst=Off
rstorage=Off
solitaire=On
templates=Off
TSClients=Off
TSEnable=Off
vol=On
Click to expand...

Click to expand...
http:// [Proxy] Proxy_Enable=0 Use...TSEnable=Off vol=On [/QUOTE] [/QUOTE][/QUOTE]
Click to expand...
http:// [Proxy] Proxy_Enable=0 Use...TSEnable=Off vol=On [/QUOTE] [/QUOTE][/QUOTE][/QUOTE][/QUOTE][/QUOTE]
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Winnt.sif NIC driver issue 1
New installation wont auto login 2
Error installing SNMP with SYSOCMGR 1
Help - Unattend dont take all options 1

Top