setup error

[Chris Lewis]

I am starting a new system with a 40gig hard drive that I
have ghosted from my main system. The old M/B was an MSI
KT3 Ultra. The new system is an MSI K7N2 Delta with a
Athlon 2500 Barton/256mg ram/MSI TI 4600 video/SB live
sound card. When I boot the new system and the Windows
2000 screen comes up and the loading bar gets 1 or 2
segments it blue screens with the following error
:"Stop: 0x0000007B
(0xED41B84C,0xC0000034,0x00000000,0x00000000)
inaccessible_boot_device"

This is a ghost copy of the HD on my current system.
Everything is the same except the M/B. Can anyone help me?

 

[Sean Dwyer[MSFT]]

The problem is more than likely that the motherboard isn't the same.
More than likely it uses a different disk controller driver and you're
seeing the Stop 0x7B error.
The 0xC0000034 indicates the following:
Status Code 0xC0000034
----------------------
This status code equates to STATUS_OBJECT_NAME_NOT_FOUND, which means that
the mass-storage device required to boot the computer is not present or is
disabled. If the target computer generates this stop message during the boot
process, the required boot device may not be present or may not have the
correct drivers present.

122926 Troubleshooting Stop 0x0000007B or "0x4,0,0,0" Error
http://support.microsoft.com/?id=122926
316401 "STOP 0x0000007B" Error Message When You Restart Your Windows
XP-Based
http://support.microsoft.com/?id=316401

You will also want to look this article over:
249694 How to Move a Windows 2000 Installation to Different Hardware
http://support.microsoft.com/?id=249694

You could try to boot off the CD of proceed as though you were installing a
new copy of the OS. At one point, if the disks are detected and Setup finds
a valid installation, it will notify you that there already IS an
installation of Windows on the disks and it will offer to repair it for you.
Go through with this option and it will install all the system files and do
a mini-hardware detection that should find the controller. If the disks are
being seen you may need to provide the correct mass storagte drivers by
hitting F6 during the first screen of the install.

--
This posting is provided "AS IS" with no warranties, and confers no rights.



: I am starting a new system with a 40gig hard drive that I
: have ghosted from my main system. The old M/B was an MSI
: KT3 Ultra. The new system is an MSI K7N2 Delta with a
: Athlon 2500 Barton/256mg ram/MSI TI 4600 video/SB live
: sound card. When I boot the new system and the Windows
: 2000 screen comes up and the loading bar gets 1 or 2
: segments it blue screens with the following error
: :"Stop: 0x0000007B
: (0xED41B84C,0xC0000034,0x00000000,0x00000000)
: inaccessible_boot_device"
:
: This is a ghost copy of the HD on my current system.
: Everything is the same except the M/B. Can anyone help me?