Service won't start !!!

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Product: MegaRaid Configuration Console Package
Error 1920. Service RAID_SERVER failed to start. Verify that you have
sufficient privileges to start system services.

Please help.

Kind Regards,
Addy
 
addy said:
Product: MegaRaid Configuration Console Package
Error 1920. Service RAID_SERVER failed to start. Verify that you have
sufficient privileges to start system services.
Click to expand...

What did the MegaRaid tech support people say?

Malke
 
If you are Registry savvy, then you should check the key value for
the service Raid_Server found at:
HKLM\System\CurrentControlSet\Services
**Service Listing is alphabetical, expand Raid_Server [+]
Locate the sub-key "ObjectName" and see if it's value is set to
NT_Authority\LocalService
 
McCarty,
The value is OK, what can i do next?

R. McCarty said:
If you are Registry savvy, then you should check the key value for
the service Raid_Server found at:
HKLM\System\CurrentControlSet\Services
**Service Listing is alphabetical, expand Raid_Server [+]
Locate the sub-key "ObjectName" and see if it's value is set to
NT_Authority\LocalService

addy said:
Malke,
thx for reply.
Can't find a solution on the MegaRaid Page.

Regards,

Addy
Click to expand...
Click to expand...
 
Use Services.Msc, Locate the Raid_Server in the listing. Double
Click it to bring up the details box. Click on the "Dependencies"
(TAB) and verify that all the other Services are running. ( Started
and to either Automatic or Manual start mode )

addy said:
McCarty,
The value is OK, what can i do next?

R. McCarty said:
If you are Registry savvy, then you should check the key value for
the service Raid_Server found at:
HKLM\System\CurrentControlSet\Services
**Service Listing is alphabetical, expand Raid_Server [+]
Locate the sub-key "ObjectName" and see if it's value is set to
NT_Authority\LocalService

addy said:
Malke,
thx for reply.
Can't find a solution on the MegaRaid Page.

Regards,

Addy

:

addy wrote:

Product: MegaRaid Configuration Console Package
Error 1920. Service RAID_SERVER failed to start. Verify that you
have
sufficient privileges to start system services.

What did the MegaRaid tech support people say?

Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User
Click to expand...
Click to expand...
Click to expand...
 
McCarty,

that's als a problem, the next service is spyser and won't start also.
I removed the program and try to install it again..... but nothing works,
i still get the message verify that you have sufficient privileges to start
system services........
Regards,
Addy

R. McCarty said:
Use Services.Msc, Locate the Raid_Server in the listing. Double
Click it to bring up the details box. Click on the "Dependencies"
(TAB) and verify that all the other Services are running. ( Started
and to either Automatic or Manual start mode )

addy said:
McCarty,
The value is OK, what can i do next?

R. McCarty said:
If you are Registry savvy, then you should check the key value for
the service Raid_Server found at:
HKLM\System\CurrentControlSet\Services
**Service Listing is alphabetical, expand Raid_Server [+]
Locate the sub-key "ObjectName" and see if it's value is set to
NT_Authority\LocalService

Malke,
thx for reply.
Can't find a solution on the MegaRaid Page.

Regards,

Addy

:

addy wrote:

Product: MegaRaid Configuration Console Package
Error 1920. Service RAID_SERVER failed to start. Verify that you
have
sufficient privileges to start system services.

What did the MegaRaid tech support people say?

Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User
Click to expand...
Click to expand...
Click to expand...
 
addy said:
McCarty,

that's als a problem, the next service is spyser and won't start also.
I removed the program and try to install it again..... but nothing
works, i still get the message verify that you have sufficient
privileges to start system services........
Regards,
Click to expand...

The First Question Of Troubleshooting: what changed between the time
things worked and the time they didn't?

The Second Question of Windows Troubleshooting: what is the
malware/virus status of the machine? If you think it is clean, what
programs (and versions) did you use to determine this?

Be sure the computer is clean:
http://www.elephantboycomputers.com/page2.html#Removing_Malware

Malke
 
Malke,

1 question - it never works !!! ( i installed a Raid controller )
2 question - its not a virus, but a system service

Spyser Depend on raid_server and raid_server depend on spyser.
 
addy said:
Malke,

1 question - it never works !!! ( i installed a Raid controller )
2 question - its not a virus, but a system service

Spyser Depend on raid_server and raid_server depend on spyser.
Click to expand...

I wasn't questioning whether the service was a virus or not. I was
asking you if the computer was clean in general because services not
working are often symptomatic of infection.

I'm sorry but you are going to need to get help from the people who made
the RAID controller. You will have to contact them or find another
solution to whatever you are trying to do.

I'm sorry that I was unable to help you.

Malke
 
Back
Top