Second Printer won't show on network

[Lew]

I have wired/wireless network (Netgear WGT624) with two desktops (HP
Media Center m7250n 2.8Ghz, Gateway 1.6Ghz), and a notebook (Dell 4000
800mhz).

At first the only printer was an HP 1175cxi plugged into the parallel
port on the HP m7250n. Both the other computers could see and use that
printer.

I added another printer (HP 952c) into a USB port on the HP m7250n.
That computer sees and uses the HP 952c and the HP 1175cxi just fine.

The other two computers can only see the original printer installed in
the parallel port. They can't see or use the printer plugged into the
USB port.

When I plugged the additional printer into the HP m7250n, it was
installed before I could walk around to the keybaord.

I tried to use the "add printer" procedure but when I browse the
network the new printer is not there.

Got any ideas?

Thanks,

Lew

 

[Ron Lowe]

Have you shared the new printer on the HP m7250n?

 

[Lew]

Duh.

Thanks.

It worked.

Lew

Have you shared the new printer on the HP m7250n?