no, single data rate and double data rate ram are totally different
configuration. sdr probably wont even fit in the slot much less work with
the bus and board. i'm guessing you have some pc-133 sdr. ram is still
cheap. get a good stick of 512 ddr.
SDR SDRAM such as PC100/PC133 is 168 pins. DDR such as
PC2100/PC2700 is 184 pins. Also there is a notch on the
base that must match the hump in the slot.
| no, single data rate and double data rate ram are totally
different
| configuration. sdr probably wont even fit in the slot much
less work with
| the bus and board. i'm guessing you have some pc-133 sdr.
ram is still
| cheap. get a good stick of 512 ddr.
|
| squid
|
message
| | > I have a motherboard the has DDR DIMM ram slots, will my
| > SDR DIMM ram work in these slots?
|
|
All "good mechanics" know the when a part doesn't fit you
just need a BFH.
| With the appropriately sized hammer, one can install a 168
pin SDR into a
| 184 pin DDR slot.
|
| Results vary according to the size of the hammer.
|
| steve
|
|
in message
| | > SDR SDRAM such as PC100/PC133 is 168 pins. DDR such as
| > PC2100/PC2700 is 184 pins. Also there is a notch on the
| > base that must match the hump in the slot.
| >
|
|
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.
