RRAS routing - need help!

S

Stilus

Hi,

I have to connect two of locations with VPN connection and ISDN as a
backup connection. On both of locations are routers. On one location I
have one NIC card installed on server computer, and on the other
location I have two of NIC cards installed on server computer (the one
with ISDN).
At first location I have one network, and on the other one I have two
networks (two NIC cards).

Could someone explain me how to connect those natworks?? How to
configure RRAS so thet all of the networks could see each other??

Hope that someone will help. If I have to explain the situation better
I will do so - just ask me. thanks
 
R

Robert L [MVP - Networking]

In this case, you can setup Windows site to site VPN. You need to make sure the server with two NICs has correct routing table.

Site to Site VPN To setup a Site-to-Site VPN Connection , you may need to configure two windows servers for the Answering and Calling Routers. Here are the steps: ...
www.chicagotech.net/site%20to%20site%20vpn.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Hi,

I have to connect two of locations with VPN connection and ISDN as a
backup connection. On both of locations are routers. On one location I
have one NIC card installed on server computer, and on the other
location I have two of NIC cards installed on server computer (the one
with ISDN).
At first location I have one network, and on the other one I have two
networks (two NIC cards).

Could someone explain me how to connect those natworks?? How to
configure RRAS so thet all of the networks could see each other??

Hope that someone will help. If I have to explain the situation better
I will do so - just ask me. thanks
 
G

Guest

I have barely the same problem, but I got two w2k server with 2 NIC each, one
pointing over invernet and the another to they respective lan's. I'd like
those lan can see it.
I dont know if the SITE TO SITE VPN works with W2K and ISA2000
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top