2K RRAS not routing for vpn clients

[Guillermo Lovato]

I have an old w2k RRAS server that is having hardware problems and we're
upgrading it to a new one(still with W2k).
the problem is that the new server isn't routing!, the vpn clients connect,
can ping the server ip but every other ip in the internal network doesn't
works.
the VPN server is configured EXACTLY the same screen by screen, same ip,
same static routes, same remote pool.
the ip pool for clients use the same ip as the internal network.

the rras server has only one NIC with only one IP 192.168.1.150 subnet
255.255.254.0
there is a internal gateway in the 192.168.0.252 i can't remember correctly.
i've tried putting a .0.x ip or .1 to no avail.
i checked the client's routes and they all seem ok.

any ideas if i need a patch or something?

 

[Robert L [MVP - Networking]]

Have you enable the IP routing? These search results ay help,
routing issues on vpn
Can ping VPN server only but not other resources Can't access the internal server when remote client establishes VPN Can't access the Internet while using ...
http://www.chicagotech.net/routingissuesonvpn.htm - Similar pages

VPN Issues
Can ping the RRAS server but other resources because of Office Scan client Can't access the remote network at home only Can't access VPN ...
http://www.chicagotech.net/vpn.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
I have an old w2k RRAS server that is having hardware problems and we're
upgrading it to a new one(still with W2k).
the problem is that the new server isn't routing!, the vpn clients connect,
can ping the server ip but every other ip in the internal network doesn't
works.
the VPN server is configured EXACTLY the same screen by screen, same ip,
same static routes, same remote pool.
the ip pool for clients use the same ip as the internal network.

the rras server has only one NIC with only one IP 192.168.1.150 subnet
255.255.254.0
there is a internal gateway in the 192.168.0.252 i can't remember correctly.
i've tried putting a .0.x ip or .1 to no avail.
i checked the client's routes and they all seem ok.

any ideas if i need a patch or something?

 

[Guillermo Lovato]

yes, it has IP routing enabled on the properties, also access server.
i have only one NIC, checked those two links and haven't found anything
particular,
i'll continue checking
Have you enable the IP routing? These search results ay help,
routing issues on vpn
Can ping VPN server only but not other resources Can't access the
internal server when remote client establishes VPN Can't access the Internet
while using ...
http://www.chicagotech.net/routingissuesonvpn.htm - Similar pages

VPN Issues
Can ping the RRAS server but other resources because of Office Scan
client Can't access the remote network at home only Can't access VPN ...
http://www.chicagotech.net/vpn.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
I have an old w2k RRAS server that is having hardware problems and we're
upgrading it to a new one(still with W2k).
the problem is that the new server isn't routing!, the vpn clients
connect,
can ping the server ip but every other ip in the internal network doesn't
works.
the VPN server is configured EXACTLY the same screen by screen, same ip,
same static routes, same remote pool.
the ip pool for clients use the same ip as the internal network.

the rras server has only one NIC with only one IP 192.168.1.150 subnet
255.255.254.0
there is a internal gateway in the 192.168.0.252 i can't remember
correctly.
i've tried putting a .0.x ip or .1 to no avail.
i checked the client's routes and they all seem ok.

any ideas if i need a patch or something?

 

[Robert L [MVP - Networking]]

Posting the results of ipconfig /all and routing table in RRAS server may help.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
yes, it has IP routing enabled on the properties, also access server.
i have only one NIC, checked those two links and haven't found anything
particular,
i'll continue checking
Have you enable the IP routing? These search results ay help,
routing issues on vpn
Can ping VPN server only but not other resources Can't access the
internal server when remote client establishes VPN Can't access the Internet
while using ...
http://www.chicagotech.net/routingissuesonvpn.htm - Similar pages

VPN Issues
Can ping the RRAS server but other resources because of Office Scan
client Can't access the remote network at home only Can't access VPN ....
http://www.chicagotech.net/vpn.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
I have an old w2k RRAS server that is having hardware problems and we're
upgrading it to a new one(still with W2k).
the problem is that the new server isn't routing!, the vpn clients
connect,
can ping the server ip but every other ip in the internal network doesn't
works.
the VPN server is configured EXACTLY the same screen by screen, same ip,
same static routes, same remote pool.
the ip pool for clients use the same ip as the internal network.

the rras server has only one NIC with only one IP 192.168.1.150 subnet
255.255.254.0
there is a internal gateway in the 192.168.0.252 i can't remember
correctly.
i've tried putting a .0.x ip or .1 to no avail.
i checked the client's routes and they all seem ok.

any ideas if i need a patch or something?