RIS saying not enough disk space

[Guest]

Hey Everyone,

I am trying to pull an image from my 2003 RIS server and I am getting an
error saying there is not enough disk space on the hard drive. Now, the
image is only 4 GB and the drive is 20GB. The drive is recognized in BIOS.
Is this a misleading error where something else could be wrong? It's weird
because I tried two different drives on the same PC with the same results.
Not sure what to do and any help at all would be greatly appreciated!
Thanks!!!

Rich

 

[Guest]

Guys, never mind, I figured out what is going on. Here is a good link if
anyone else comes across this message

http://support.microsoft.com/default.aspx?scid=kb;en-us;320982

 

[Carey Frisch [MVP]]

How mush physical RAM do you have installed?
Did you create a partition on the hard drive?

--
Carey Frisch
Microsoft MVP
Windows - Shell/User
Microsoft Community Newsgroups
news://msnews.microsoft.com/

---------------------------------------------------------------------------­----------------

:

| Hey Everyone,
|
| I am trying to pull an image from my 2003 RIS server and I am getting an
| error saying there is not enough disk space on the hard drive. Now, the
| image is only 4 GB and the drive is 20GB. The drive is recognized in BIOS.
| Is this a misleading error where something else could be wrong? It's weird
| because I tried two different drives on the same PC with the same results.
| Not sure what to do and any help at all would be greatly appreciated!
| Thanks!!!
|
| Rich

 

[Guest]

Hi Carey,

I know this was 2 months ago (and thanks so much for writing back), but I
figured this one out. The reference PC I used had a larger hard drive than
the PC I was trying to push an image to. That was my issue. I made a new
image with a minimally small hard drive and all other installations were
golden. Thanks again!

Rich