Replaced motherboard, xp BSODs, what to do?

Z

Zootal

I replaced my motherboard. The old board had a Via chipset, the new one has
an SIS chipset. XP will now BSOD if I try to start it, it won't even start
in safe mode. Is there any way to fix it without reinstalling XP from
scratch?
 
B

Bruce Chambers

"Zootal" <Don't send me any freaking spam at zootal dot com remove the don't
send me any freaking spam> wrote in message
I replaced my motherboard. The old board had a Via chipset, the new one has
an SIS chipset. XP will now BSOD if I try to start it, it won't even start
in safe mode. Is there any way to fix it without reinstalling XP from
scratch?



Normally, and assuming a retail license, or an unbranded, generic OEM
license (many factory-installed OEM installations are BIOS-locked to a
specific chipset and therefore are *not* transferable to a new motherboard -
check yours before starting), unless the new motherboard is virtually
identical (same chipset, same IDE controllers, same BIOS version, etc.) to
the one on which the WinXP installation was originally performed, you'll
need to perform a repair (a.k.a. in-place upgrade) installation, at the very
least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

Changing a Motherboard or Moving a Hard Drive with WinXP Installed
http://www.michaelstevenstech.com/moving_xp.html

The "why" is quite simple, really, and has nothing to do with licensing
issues, per se; it's a purely technical matter, at this point. You've
pulled the proverbial hardware rug out from under the OS. (If you don't
like -- or get -- the rug analogy, think of it as picking up a Cape Cod
style home and then setting it down onto a Ranch style foundation. It just
isn't going to fit.) WinXP, like Win2K before it, is not nearly as
"promiscuous" as Win9x when it comes to accepting any old hardware
configuration you throw at it. On installation it "tailors" itself to the
specific hardware found. This is one of the reasons that the entire
WinNT/2K/XP OS family is so much more stable than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a Volume
Licensed version of WinXP Pro installed. If it's been more than 120 days
since you last activated that specific Product Key, you'll most likely be
able to activate via the Internet without problem. If it's been less, you
might have to make a 5 minute phone call.


--
Bruce Chambers

Help us help you:



They that can give up essential liberty to obtain a little temporary safety
deserve neither liberty nor safety. -Benjamin Franklin

Many people would rather die than think; in fact, most do. -Bertrand Russell
 
N

NoConsequence

I replaced my motherboard. The old board had a Via chipset, the new one has
an SIS chipset. XP will now BSOD if I try to start it, it won't even start
in safe mode. Is there any way to fix it without reinstalling XP from
scratch?
You need to do a repair install.
 
Z

Zootal

That worked. It boots again. And surprisingly, I didn't have to re-activate.
I sent from a Via chipset to a SIS chipset board with onboard sound, lan,
video, and I thought for sure XP would want to re-activate. However, Windows
Update causes IE to stop responding, so I can't run update to update
Windows...so we aren't quite out of the water yet. I tried to download IE7
and it complained that I could not do it with my current SP level. So I
manually downloaded SP2 and applied it. Surprise, surprise, now Windows
Update in IE works.

So I'm guessing switching motherboards like this upsets XP because it
doesn't have drivers for this board. I'm curious that I was able to boot to
Linux without any problem, does Linux not have specific chipset drivers like
Windows does?
 
D

DL

I know nothing about Linux

"Zootal" <Don't send me any freaking spam at zootal dot com remove the don't
send me any freaking spam> wrote in message
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top