Red Alert C&C Windows 95

[Guest]

I have just got Red Alert Comand & Conquer on my Windows XP and whenever I
try to play Red Alert I get this message; The procedure entry point
SMapLS_IP_EBP12 could not be located in the dynamic link library KERNEL32.dll.
If anybody can help me fix this problem then I would really be thankful.

 

[Paul Smith]

I have just got Red Alert Comand & Conquer on my Windows XP and whenever I
try to play Red Alert I get this message; The procedure entry point
SMapLS_IP_EBP12 could not be located in the dynamic link library
KERNEL32.dll.
If anybody can help me fix this problem then I would really be thankful.

Little bit of dé·jà vu going on me thinks.

Have you tried compatibility mode?

Either hold down shift when you insert the CD, or simply close the autoplay
window, then go to My Computer right click your CD-ROM drive icon and click
browse.

On the CD should be either an install or setup program, if you right click
that and go to properties, a new window will appear, you want compatibility
mode, so click the tab at the top.

From here you can choose to run the game in compatibility mode, you might
want to try them all - I'd guess that Windows 95 / 98 / Me will do the trick
however. You might also want to try checking the 256 colours and screen
resolution etc boxes as well if you get no luck in Win 9x mode.

--
Paul Smith,
Yeovil, UK.
http://www.dasmirnov.net/
http://windows.dasmirnov.net/ Windows XP Resource Site.

*Replace nospam with smirnov to reply by e-mail*

 

[Jimmy S.]

Hi,

Please see my response to Ellimist ;-)

I have just got Red Alert Comand & Conquer on my Windows XP and whenever I
try to play Red Alert I get this message; The procedure entry point
SMapLS_IP_EBP12 could not be located in the dynamic link library KERNEL32.dll.
If anybody can help me fix this problem then I would really be thankful.

--
Cheers, Windows XP MVP Shell / User
Jimmy S. http://mvp.support.microsoft.com

Game FAQs: http://support.microsoft.com/default.aspx?scid=FH;[LN];gms
Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
MS Assisted Support: http://support.microsoft.com/select/?target=assistance
My advice is donated "AS IS" without warranty; nor do I confer any rights.
_________________________________________________________

 

[DosFreak]

Install the patch which fixes this issue....and makes Internet play not
work.

Hi,

Please see my response to Ellimist ;-)

"(e-mail address removed)"

I have just got Red Alert Comand & Conquer on my Windows XP and whenever I
try to play Red Alert I get this message; The procedure entry point
SMapLS_IP_EBP12 could not be located in the dynamic link library KERNEL32.dll.
If anybody can help me fix this problem then I would really be

thankful.


--
Cheers, Windows XP MVP Shell / User
Jimmy S. http://mvp.support.microsoft.com

Game FAQs: http://support.microsoft.com/default.aspx?scid=FH;[LN];gms
Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
MS Assisted Support: http://support.microsoft.com/select/?target=assistance
My advice is donated "AS IS" without warranty; nor do I confer any rights.
_________________________________________________________

 

[Jimmy S.]

Agreed. That was also in my post to Ellimist.
Guess they didn't read that part of my post.

Cheers,
Jimmy.

Install the patch which fixes this issue....and makes Internet play not
work.

Hi,

Please see my response to Ellimist ;-)

"(e-mail address removed)"

I have just got Red Alert Comand & Conquer on my Windows XP and whenever I
try to play Red Alert I get this message; The procedure entry point
SMapLS_IP_EBP12 could not be located in the dynamic link library KERNEL32.dll.
If anybody can help me fix this problem then I would really be

thankful.


--
Cheers, Windows XP MVP Shell / User
Jimmy S. http://mvp.support.microsoft.com

Game FAQs: http://support.microsoft.com/default.aspx?scid=FH;[LN];gms
Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
MS Assisted Support: http://support.microsoft.com/select/?target=assistance
My advice is donated "AS IS" without warranty; nor do I confer any rights.
_________________________________________________________

 

[Guest]

IF anybody could help me get my Red Alert Game going i would be really
thankful.
I will give remote access to the person who thinks they can help

Agreed. That was also in my post to Ellimist.
Guess they didn't read that part of my post.

Cheers,
Jimmy.

Install the patch which fixes this issue....and makes Internet play not
work.

Hi,

Please see my response to Ellimist ;-)

"(e-mail address removed)"

I have just got Red Alert Comand & Conquer on my Windows XP and whenever I
try to play Red Alert I get this message; The procedure entry point
SMapLS_IP_EBP12 could not be located in the dynamic link library KERNEL32.dll.
If anybody can help me fix this problem then I would really be thankful.


--
Cheers, Windows XP MVP Shell / User
Jimmy S. http://mvp.support.microsoft.com

Game FAQs: http://support.microsoft.com/default.aspx?scid=FH;[LN];gms
Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
MS Assisted Support: http://support.microsoft.com/select/?target=assistance
My advice is donated "AS IS" without warranty; nor do I confer any rights.
_________________________________________________________

 

[Jimmy S.]

Hi Ryan,

Try installing and playing that using 95/98 Compatibility mode.

To install a program using Windows XP's Compatibility Mode, hold
down SHIFT as you insert the game CD, use My Computer to browse
to the setup program, and then skip down to step 1 in the list below:

To run an installed program using Windows XP's Compatibility Mode,
first right click the program and "Send To..." / Desktop (create shortcut).

1.. Right click on the shortcut to the program.
2.. Click on Properties.
3.. Click on the Compatibility tab.
4.. Click on Run this program in compatibility mode and select one of these:
a.. Windows 95
b.. Windows 98
c.. Windows NT 4
d.. Windows 2000
5.. Under Display settings, check mark the mode that you think that is best:
a.. Run in 256 colors.
b.. Run in 640 X 480 screen resolution.
c.. Disable visual themes.

Click on Apply.Click on Ok.Double click on the program.

Of course, let's not forget to check for any patches or updates for that game.
A good place to find them is: www.avault.com/pcrl/patches_list.asp?letter=a

If you'd like to learn more information about compatibility mode, you can click the
link in the Compatibility tab that reads "Learn more about program compatibility",
or watch this Application Compatibility Power Point Presentation:
http://support.microsoft.com/servicedesks/webcasts/wc112202/WC112202.ppt

--
Cheers, Windows XP MVP Shell / User
Jimmy S. http://mvp.support.microsoft.com

Game FAQs: http://support.microsoft.com/default.aspx?scid=FH;[LN];gms
Visit my Zone.com / Gaming Helpsite: http://nibblesnbits.tk or Call / Contact
MS Support at: http://support.microsoft.com/default.aspx?scid=sz;en-us;top
My advice is donated "AS IS" without warranty; nor do I confer any rights.
_________________________________________________________

IF anybody could help me get my Red Alert Game going i would be really
thankful.
I will give remote access to the person who thinks they can help

Agreed. That was also in my post to Ellimist.
Guess they didn't read that part of my post.

Cheers,
Jimmy.

Install the patch which fixes this issue....and makes Internet play not
work.

Jimmy S. wrote:
Hi,

Please see my response to Ellimist ;-)

"(e-mail address removed)"
I have just got Red Alert Comand & Conquer on my Windows XP and
whenever I
try to play Red Alert I get this message; The procedure entry point
SMapLS_IP_EBP12 could not be located in the dynamic link library
KERNEL32.dll.
If anybody can help me fix this problem then I would really be
thankful.


--
Cheers, Windows XP MVP Shell / User
Jimmy S.
http://mvp.support.microsoft.com

Game FAQs: http://support.microsoft.com/default.aspx?scid=FH;[LN];gms
Visit my MSN Zone.com and Gaming Help Site:
http://mvps.org/nibblesnbits
MS Assisted Support:
http://support.microsoft.com/select/?target=assistance
My advice is donated "AS IS" without warranty; nor do I confer any
rights.
_________________________________________________________

 

[Jimmy S.]

Hi Ryan,

Try installing and playing that using 95/98 Compatibility mode.

To install a program using Windows XP's Compatibility Mode, hold
down SHIFT as you insert the game CD, use My Computer to browse
to the setup program, and then skip down to step 1 in the list below:

To run an installed program using Windows XP's Compatibility Mode,
first right click the program and "Send To..." / Desktop (create shortcut).

1.. Right click on the shortcut to the program.
2.. Click on Properties.
3.. Click on the Compatibility tab.
4.. Click on Run this program in compatibility mode and select one of these:
a.. Windows 95
b.. Windows 98
c.. Windows NT 4
d.. Windows 2000
5.. Under Display settings, check mark the mode that you think that is best:
a.. Run in 256 colors.
b.. Run in 640 X 480 screen resolution.
c.. Disable visual themes.

Click on Apply.Click on Ok.Double click on the program.

Of course, let's not forget to check for any patches or updates for that game.
A good place to find them is: www.avault.com/pcrl/patches_list.asp?letter=a

If you'd like to learn more information about compatibility mode, you can click the
link in the Compatibility tab that reads "Learn more about program compatibility",
or watch this Application Compatibility Power Point Presentation:
http://support.microsoft.com/servicedesks/webcasts/wc112202/WC112202.ppt

--
Cheers, Windows XP MVP Shell / User
Jimmy S. http://mvp.support.microsoft.com

Game FAQs: http://support.microsoft.com/default.aspx?scid=FH;[LN];gms
Visit my Zone.com / Gaming Helpsite: http://nibblesnbits.tk or Call / Contact
MS Support at: http://support.microsoft.com/default.aspx?scid=sz;en-us;top
My advice is donated "AS IS" without warranty; nor do I confer any rights.
_________________________________________________________

IF anybody could help me get my Red Alert Game going i would be really
thankful.
I will give remote access to the person who thinks they can help

Agreed. That was also in my post to Ellimist.
Guess they didn't read that part of my post.

Cheers,
Jimmy.

Install the patch which fixes this issue....and makes Internet play not
work.

Jimmy S. wrote:
Hi,

Please see my response to Ellimist ;-)

"(e-mail address removed)"
I have just got Red Alert Comand & Conquer on my Windows XP and
whenever I
try to play Red Alert I get this message; The procedure entry point
SMapLS_IP_EBP12 could not be located in the dynamic link library
KERNEL32.dll.
If anybody can help me fix this problem then I would really be
thankful.


--
Cheers, Windows XP MVP Shell / User
Jimmy S.
http://mvp.support.microsoft.com

Game FAQs: http://support.microsoft.com/default.aspx?scid=FH;[LN];gms
Visit my MSN Zone.com and Gaming Help Site:
http://mvps.org/nibblesnbits
MS Assisted Support:
http://support.microsoft.com/select/?target=assistance
My advice is donated "AS IS" without warranty; nor do I confer any
rights.
_________________________________________________________

 

[Guest]

It still didn't help when ever i try to play it this message pops up: (The
Procedure entry point SMapLS_IPEBP_12 could not be located in the dynamic
link library KERNANEL.31.dll. so what do i do now??

Hi Ryan,

Try installing and playing that using 95/98 Compatibility mode.

To install a program using Windows XP's Compatibility Mode, hold
down SHIFT as you insert the game CD, use My Computer to browse
to the setup program, and then skip down to step 1 in the list below:

To run an installed program using Windows XP's Compatibility Mode,
first right click the program and "Send To..." / Desktop (create shortcut).

1.. Right click on the shortcut to the program.
2.. Click on Properties.
3.. Click on the Compatibility tab.
4.. Click on Run this program in compatibility mode and select one of these:
a.. Windows 95
b.. Windows 98
c.. Windows NT 4
d.. Windows 2000
5.. Under Display settings, check mark the mode that you think that is best:
a.. Run in 256 colors.
b.. Run in 640 X 480 screen resolution.
c.. Disable visual themes.

Click on Apply.Click on Ok.Double click on the program.

Of course, let's not forget to check for any patches or updates for that game.
A good place to find them is: www.avault.com/pcrl/patches_list.asp?letter=a

If you'd like to learn more information about compatibility mode, you can click the
link in the Compatibility tab that reads "Learn more about program compatibility",
or watch this Application Compatibility Power Point Presentation:
http://support.microsoft.com/servicedesks/webcasts/wc112202/WC112202.ppt

--
Cheers, Windows XP MVP Shell / User
Jimmy S. http://mvp.support.microsoft.com

Game FAQs: http://support.microsoft.com/default.aspx?scid=FH;[LN];gms
Visit my Zone.com / Gaming Helpsite: http://nibblesnbits.tk or Call / Contact
MS Support at: http://support.microsoft.com/default.aspx?scid=sz;en-us;top
My advice is donated "AS IS" without warranty; nor do I confer any rights.
_________________________________________________________

IF anybody could help me get my Red Alert Game going i would be really
thankful.
I will give remote access to the person who thinks they can help

Agreed. That was also in my post to Ellimist.
Guess they didn't read that part of my post.

Cheers,
Jimmy.

Install the patch which fixes this issue....and makes Internet play not
work.

Jimmy S. wrote:
Hi,

Please see my response to Ellimist ;-)

"(e-mail address removed)"
I have just got Red Alert Comand & Conquer on my Windows XP and
whenever I
try to play Red Alert I get this message; The procedure entry point
SMapLS_IP_EBP12 could not be located in the dynamic link library
KERNEL32.dll.
If anybody can help me fix this problem then I would really be
thankful.


--
Cheers, Windows XP MVP Shell / User
Jimmy S.
http://mvp.support.microsoft.com

Game FAQs: http://support.microsoft.com/default.aspx?scid=FH;[LN];gms
Visit my MSN Zone.com and Gaming Help Site:
http://mvps.org/nibblesnbits
MS Assisted Support:
http://support.microsoft.com/select/?target=assistance
My advice is donated "AS IS" without warranty; nor do I confer any
rights.
_________________________________________________________

 

[Jimmy S.]

Hi Ryan,

Which compatibility options are you starting the game with?

--
Cheers, Windows XP MVP Shell / User
Jimmy S. http://mvp.support.microsoft.com

Game FAQs: http://support.microsoft.com/default.aspx?scid=FH;[LN];gms
Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
MS Assisted Support: http://support.microsoft.com/select/?target=assistance
My advice is donated "AS IS" without warranty; nor do I confer any rights.
_________________________________________________________

It still didn't help when ever i try to play it this message pops up: (The
Procedure entry point SMapLS_IPEBP_12 could not be located in the dynamic
link library KERNANEL.31.dll. so what do i do now??

Hi Ryan,

Try installing and playing that using 95/98 Compatibility mode.

To install a program using Windows XP's Compatibility Mode, hold
down SHIFT as you insert the game CD, use My Computer to browse
to the setup program, and then skip down to step 1 in the list below:

To run an installed program using Windows XP's Compatibility Mode,
first right click the program and "Send To..." / Desktop (create shortcut).

1.. Right click on the shortcut to the program.
2.. Click on Properties.
3.. Click on the Compatibility tab.
4.. Click on Run this program in compatibility mode and select one of these:
a.. Windows 95
b.. Windows 98
c.. Windows NT 4
d.. Windows 2000
5.. Under Display settings, check mark the mode that you think that is best:
a.. Run in 256 colors.
b.. Run in 640 X 480 screen resolution.
c.. Disable visual themes.

Click on Apply.Click on Ok.Double click on the program.

Of course, let's not forget to check for any patches or updates for that game.
A good place to find them is: www.avault.com/pcrl/patches_list.asp?letter=a

If you'd like to learn more information about compatibility mode, you can click the
link in the Compatibility tab that reads "Learn more about program compatibility",
or watch this Application Compatibility Power Point Presentation:
http://support.microsoft.com/servicedesks/webcasts/wc112202/WC112202.ppt

--
Cheers, Windows XP MVP Shell / User
Jimmy S. http://mvp.support.microsoft.com

Game FAQs: http://support.microsoft.com/default.aspx?scid=FH;[LN];gms
Visit my Zone.com / Gaming Helpsite: http://nibblesnbits.tk or Call / Contact
MS Support at: http://support.microsoft.com/default.aspx?scid=sz;en-us;top
My advice is donated "AS IS" without warranty; nor do I confer any rights.
_________________________________________________________

IF anybody could help me get my Red Alert Game going i would be really
thankful.
I will give remote access to the person who thinks they can help

:

Agreed. That was also in my post to Ellimist.
Guess they didn't read that part of my post.

Cheers,
Jimmy.

Install the patch which fixes this issue....and makes Internet play not
work.

Jimmy S. wrote:
Hi,

Please see my response to Ellimist ;-)

"(e-mail address removed)"
I have just got Red Alert Comand & Conquer on my Windows XP and
whenever I
try to play Red Alert I get this message; The procedure entry point
SMapLS_IP_EBP12 could not be located in the dynamic link library
KERNEL32.dll.
If anybody can help me fix this problem then I would really be
thankful.


--
Cheers, Windows XP MVP Shell / User
Jimmy S.
http://mvp.support.microsoft.com

Game FAQs: http://support.microsoft.com/default.aspx?scid=FH;[LN];gms
Visit my MSN Zone.com and Gaming Help Site:
http://mvps.org/nibblesnbits
MS Assisted Support:
http://support.microsoft.com/select/?target=assistance
My advice is donated "AS IS" without warranty; nor do I confer any
rights.
_________________________________________________________

 

[LORD_AYER]

Hello I am the new one and i've just registered for this subjekt!!

MY windows compatibly-mode doesn't have an effeck

 

[Jimmy S.]

Hi,

It will be easier to help you if you could post which game
it is, what your system specs are, and the error message.

--
Cheers, Windows XP MVP Shell / User
Jimmy S. http://mvp.support.microsoft.com

Game FAQs: http://support.microsoft.com/default.aspx?scid=FH;[LN];gms
Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
MS Assisted Support: http://support.microsoft.com/select/?target=assistance
My advice is donated "AS IS" without warranty; nor do I confer any rights.
_________________________________________________________

| Hello I am the new one and i've just registered for this subjekt!!!
|
| MY windows compatibly-mode doesn't have an effeckt
|

 

[Guest]

I am also having exact same problem! Have installed it fine, using the
compatibility options etc. But whenever I go to play it, it says:
"The procedure entry poing SMapLS_IP_EBP_12 could not be located in the
dynamic link library KERNEL32.dll."
Even if I change the compatability on the RA95 icon, it still says it!! HELP!

 

[Jimmy S.]

Hi Richard,

You might overcome that error by finding a copy of kernel32.dll
on your drive and making a copy of it to your RA directory.

--
Cheers, Windows XP MVP Shell / User
Jimmy S. http://mvp.support.microsoft.com

Visit my MSN Zone.com and Gaming Help Site: http://mvps.org/nibblesnbits
MS Games Help and Support Center: http://support.microsoft.com/?pr=gms
My advice is donated "AS IS" without warranty; nor do I confer any rights.
_________________________________________________________

|I am also having exact same problem! Have installed it fine, using the
| compatibility options etc. But whenever I go to play it, it says:
| "The procedure entry poing SMapLS_IP_EBP_12 could not be located in the
| dynamic link library KERNEL32.dll."
| Even if I change the compatability on the RA95 icon, it still says it!! HELP!