Problems to enable DMA in W2k.

  • Thread starter Thread starter Hubert
  • Start date Start date
H

Hubert

2004/02/16



Hi everyone!



Please I need some help to enable DMA. The problem is that
I don't have the 'Advance Setting' tab in my device
manager properties for ATA/ATAPI IDE Controlers (or Disks).
My Windows 2000 is in French but if you need some more
information you can ask and I will be glad give more
details.

Windows 2000 Pro (Build 5.0.2195, Service Pack 4)

Mainboard: MSI MS-6580

Chipset 845PE Max (Socket 478)

IDE Controler is Intel 82801DB Ultra ATA Controller, ICH4
(Version 2.3.2.2160)

Intel Application Accelerator 2.3.0.2160 is installed.

Bios: AmiBios V3.4

HDD: 3 x Western Digital WDC WD800JB-00CRA1 (80Gig), 2 on
primary IDE Channel and 1 set Master on secondary IDE
Channel.

The CD RW/DVD is set slave on the secondary channel is HL-
DT-ST RW/DVD GCC-4320B.


Thank you for your help.

Hubert MAILLÉ,

(e-mail address removed)
 
Intel Application Accelerator disables AdvSettings tab in the IDE channel
Properties. You should monitor the IDE devices from IAA.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

enabling dma 2
trying to enable DMA but unable to 7
Can't enable DMA 6
Enabling DMA in Secondary IDE Master 1
DMA Problem with DVD Devices? 7
DMA settings 2
CDROM And DVD DMA Mode 1
my DMA is still off... 2

Back
Top