Problem to format HD in RIS setup


Martin H

This is my problem:
When I try to get an RIS image the computer stops after a few minutes and
say something like(the exakt problem I just have in swedish).
It was not possible to format the partiotion. The disk may be damaged.

Then it say some rubish about if it is a scsi disc etc.

This problem just accure with this spec. image, if I just take the plain
windows xp install this error dose not happen.

Does any body know what to do? is it something in the riprep.sif file?
ex. ???
Repartition = NO
UseWholeDisk = Yes

FileSystem = LeaveAlone
ExtendOEMPartition = 0

Please let me know if you know something about this.
Thanks /Martin



Martin H

the error is:
Setup was unable to format the partition. The disk may be damaged. Make sure
the drive is switched on and properly connected to your computer. If the
disk is a SCSI disk, make sure your SCSI devices are properly terminated.
Consult your computer or SCSI adapter documentation for more information.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

RIS Setup 1
RIS setup 6
Drivers for RIS setup 1
RIS problem (or No RIS is the problem) 3
RIS Setup HELP!!!! 2
RIS hostnames during setup - new problem 2
RIS Problem 4
RIS Problem? 1